According to statistics provided by the Iranian Statistics Center,40% of energy consumption is related to the housing sector. Windows as a component of exterior wall, Responsible for 20-30% of all energy infiltration. Therefore, the purpose of this study, is to optimize residential windows in cold and dry climate of Tabriz in order to reduce energy consumption. The research method is based on simulation with two methods "parametric optimization" and "genetic algorithm". The research tool is Design Builder software. So, the amount of annual gas consumption in the case study was received from the National Iranian Gas Company and then the basic research model is modeled in software and after converting the unit from kWh to m 3 and validating the obtained results from simulation, in the next step, the type of glazing and frame are changed and then the sensitivity is analyzed by the two mentioned methods. The results showed that by replacing windows with triple glazedglazing with low emission coating filled with argon, krypton and xenon gas and UPVC frame with clear double glazed-glazing filled with argon gas and iron frame, annual gas consumption for heating decreased by 52.43%, 55.34% and 56.60% and the heat loss from the windows is reduced by 7.97%, 9.54% and 10.49%, respectively.

Windows in the building are the biggest elements of heat loss through convective heat transfer. The purpose of study is to select appropriate dimensions for windows relative to shell and appropriate glazing for windows, in order to achieve optimal pattern to reduce energy consumption. The research method is based on the simulation and research tool is DesignBuilder software. Therefore, amount of natural gas consumed annually in the studied building was received from the National Iranian Gas Company and then the basic research was modeled by software and after converting unit from kWh to m 3 and validating simulation results. In the next step, the range of 20% to 80% of window-to-wall-ratio, types of glazing and window height is considered and through parametric optimization, all conditions in the windows are simulated and analyzed for sensitivity index. The calculations confirm that in an intermediate residential building with a rotation of 12 degrees to the southeast in Tabriz, by reducing window-to-wallratio from 50% to 20% and replacing triples-glazed-glazing with a low-emission coating filled with argon gas with a transparent single-glazed glazing and UPVC frame and a canopy with a depth of 48cm and windows height of 1.5m, the heat losses were reduced by 60.34% and 75.24%, respectively.

No abstract

No abstract

No abstract