Fe-doped In2O3 thin films are deposited on sapphire substrates using pulsed laser ablation. The effects of Fe concentration and oxygen partial pressure on the structure, magnetism and transport properties of (In1−xFex)2O3 films are studied systematically. A detailed analysis of the structural properties suggests the substitution of Fe dopant ions with mixture valences and rules out the presence of clusters and secondary phases as the source of ferromagnetism. Systematic investigations of transport properties for (In1−xFex)2O3 films with a wide range of carrier densities reveal that they occur in both metallic and insulating regimes. The insulating films exhibit variable range hopping at low temperatures and show temperature dependent ferromagnetism, which can be explained by bound magnetic polarons mechanism. For the metallic films, the carrier densities play a crucial role in their robust ferromagnetism and the resistivity and magnetization are independent of temperature; the carrier-mediated exchange mechanism has been suggested as responsible for magnetic ordering in these metallic films. Optical absorption and magneto-optic studies of (In1−xFex)2O3 films indicate further differences between metallic and semiconducting films and show significant magnetic circular dichroism below the In2O3 bandedge at room temperature, which also implies intrinsic ferromagnetism.

Ferromagnetic cobalt-doped indium oxide, (In 1-x Co x ) 2 O 3 , thin films with x between 1.6% and 8.1% have been studied by X-ray, magnetic and optical methods. Evidence gathered from X-ray diffraction and X-ray absorption fine structure studies suggest that the Co atoms are substitutional within the In 2 O 3 matrix. The magnetization of the film was found to consist of two components: a paramagnetic term that agrees with what is expected for paramagnetic cobalt ions and a temperature-dependent ferromagnetic hysteresis loop. The ferromagnetic component was too large to have been generated by the free carriers, implying that it originates from electrons bound in defect states associated with oxygen vacancies. This is confirmed by optical absorption and magneto-optical studies because the magnetic circular dichroism scales with concentration of cobalt and temperature in the same way as the measured magnetization.2

No abstract

Abstract.[Co(0.6 nm)/ZnO(x nm)] 60 (x= 0.4nm, 3nm) films were deposited on glass substrates then annealed in a vacuum. The magnetisation of the films increased with annealing but not the magnitude of the magneto-optical signals. The dielectric functions Im ε xy for the films were calculated using the MCD spectra. A Maxwell Garnett theory of a metallic Co/ZnO mixture is presented. The extent to which this explains the MCD spectra taken on the films is discussed.

In this report, the heating efficiencies of γ-Fe2O3 and hybrid γ-Fe2O3-TiO2 nanoparticles NPs under an alternating magnetic field (AMF) have been investigated to evaluate their feasible use in magnetic hyperthermia. The NPs were synthesized by a modified sol-gel method and characterized by different techniques. X-ray diffraction (XRD), Mössbauer spectroscopy and electron microscopy analyses confirmed the maghemite (γ-Fe2O3) phase, crystallinity, good uniformity and 10 nm core sizes of the as-synthesized composites. SQUID hysteresis loops showed a non-negligible coercive field and remanence suggesting the ferromagnetic behavior of the particles. Heating efficiency measurements showed that both samples display high heating potentials and reached magnetic hyperthermia (42 °C) in relatively short times with shorter time (~3 min) observed for γ-Fe2O3 compared to γ-Fe2O3-TiO2. The specific absorption rate (SAR) values calculated for γ-Fe2O3 (up to 90 W/g) are higher than that for γ-Fe2O3-TiO2 (~40 W/g), confirming better heating efficiency for γ-Fe2O3 NPs. The intrinsic loss power (ILP) values of 1.57 nHm2/kg and 0.64 nHm2/kg obtained for both nanocomposites are in the range reported for commercial ferrofluids (0.2–3.1 nHm2/kg). Finally, the heating mechanism responsible for NP heat dissipation is explained concluding that both Neel and Brownian relaxations are contributing to heat production. Overall, the obtained high heating efficiencies suggest that the fabricated nanocomposites hold a great potential to be utilized in a wide spectrum of applications, particularly in magnetic photothermal hyperthermia treatments.