[1] Underground gas storage (UGS) in depleted hydrocarbon reservoirs is a strategic practice to cope with the growing energy demand and occurs in many places in Europe and North America. In response to summer gas injection and winter gas withdrawal the reservoir expands and contracts essentially elastically as a major consequence of the fluid (gas and water) pore pressure fluctuations. Depending on a number of factors, including the reservoir burial depth, the difference between the largest and the smallest gas pore pressure, and the geomechanical properties of the injected formation and the overburden, the porous medium overlying the reservoir is subject to three-dimensional deformation with the related cyclic motion of the land surface being both vertical and horizontal. We present a methodology to evaluate the environmental impact of underground gas storage and sequestration from the geomechanical perspective, particularly in relation to the ground surface displacements. Long-term records of injected and removed gas volume and fluid pore pressure in the "Lombardia" gas field, northern Italy, are available together with multiyear detection of vertical and horizontal west-east displacement of the land surface above the reservoir by an advanced permanent scatterer interferometric synthetic aperture radar (PSInSAR) analysis. These data have been used to calibrate a 3-D fluid-dynamic model and develop a 3-D transversally isotropic geomechanical model. The latter has been successfully implemented and used to reproduce the vertical and horizontal cyclic displacements, on the range of 8-10 mm and 6-8 mm, respectively, measured between 2003 and 2007 above the reservoir where a UGS program has been underway by Stogit-Eni S.p.A. since 1986 following a 5 year field production life. Because of the great economical interest to increase the working gas volume as much as possible, the model addresses two UGS scenarios where the gas pore overpressure is pushed from the current 103%p i , where p i is the gas pore pressure prior to the field development, to 107%p i and 120%p i . Results of both scenarios show that there is a negligible impact on the ground surface, with deformation gradients that remain well below the most restrictive admissible limits for the civil structures and infrastructures. Citation: Teatini, P., et al. (2011), Geomechanical response to seasonal gas storage in depleted reservoirs: A case study in the Po River basin, Italy,

[1] The Emilia-Romagna coastland south of the Po River delta, Italy, has experienced a dramatic land settlement mainly due to the large groundwater withdrawal related to the local economic and tourist development started in the early 1950s. Although the use of surface water has reduced the settlement rate over the last three decades, anthropogenic land subsidence still continues in a few kilometer wide coastal strip at a rate larger than the natural one. The occurrence is reconstructed since 1946 with the aid of advanced finite element flow and poromechanical models implemented with a realistically detailed geology of the regional shallow multiaquifer system. The models have been calibrated against the piezometric, leveling, and extensometer records observed over the last 50 years, and a land subsidence prediction in 2016 is performed. The results show that the extensive groundwater pumping that occurred in the past is most likely the main cause of the recent land settlement as well because of the delayed compaction of the clay aquitards comprised between the depleted aquifers. However, the available pumping data do not allow for a thorough understanding of the current local settlement process along the coastline, which is the most vulnerable area of the Emilia-Romagna region from an environmental viewpoint. If the planned scenario of groundwater resource management will be implemented, anthropogenic land subsidence is bound to become a marginal problem for the central and northern portion of the Emilia-Romagna coastland.Citation: Teatini, P., M. Ferronato, G. Gambolati, and M. Gonella (2006), Groundwater pumping and land subsidence in the EmiliaRomagna coastland, Italy: Modeling the past occurrence and the future trend, Water Resour.

No abstract

No abstract

Abstract. Uncoupling between the flow field and the stress field in pumped aquifers is the basis of the classical groundwater hydrology. Recently, some authors have disputed the assumption of uncoupling with regard to both fluid dynamics and porous medium deformation. The issue is very important as it could undermine the traditional approach to simulate subsurface flow, analyze pumping tests, and predict land subsidence caused by fluid withdrawal. The present paper addresses the problem of coupling versus uncoupling in the Po river plain, a normally consolidated and normally pressurized basin which has experienced in the last 50 years a pronounced pore pressure drawdown because of water and gas removal and where a large hydromechanical database is available from the ground surface down to 4000 m depth. A numerical study is performed which shows that the matrix which relates flow to stress is very similar to the capacity matrix of the uncoupled flow equation. A comparison of results obtained with the finite element integration of the coupled and uncoupled models indicates that pore pressure is rather insensitive to coupling anywhere within the pumped formation while in the adjacent aquitard-aquifer units, coupling induces a slight overpressure which quickly dissipates in time with a small initial influence on medium deformation, and specifically on land subsidence. As a major consequence the uncoupled solutions to the fluid dynamic and the structural problems appear to be fully warranted on any timescale of practical interest in a typical normally consolidated and pressurized basin. IntroductionWhen an aquifer, an oil/gas reservoir, or a confining bed experiences a change of the internal flow and stress fields (typically due to fluid withdrawal), the incremental effective stresses and the fluid dynamic gradients that develop within the porous medium are intimately connected. This complex interrelation was first mathematically described by Biot [1941]. A model of flow and stress based on the Biot equations is said to be a coupled model.Groundwater hydrologists and petroleum engineers who are mostly concerned with the fluid dynamic aspects of the coupled process have developed the uncoupled flow theory, whose most widespread and used equation, the so-called diffusion equation, was originally derived by Theis [1935] more than 60 years ago. This equation incorporates the rock structural behavior into a lumped mechanical parameter (the elastic storage coefficient) and is solved separately and independently for the pore pressure p. Once p is obtained, it may be used as an external source of strength in a poroelastic model of the porous system to provide the medium deformation, typically, land subsidence, i.e., the vertical displacement at the surface boundary. This is the uncoupled, or two-step, approach followed by many authors to simulate and predict land settlement due to