Key Points:• ECOSTRESS is a state-of-the-art combination of thermal bands, spatial and temporal resolutions, and measurement accuracy and precision • Data from 82 eddy covariance sites were coalesced concurrently with the first year of ECOSTRESS for Stage 1 validation • Clear-sky ET from ECOSTRESS compared well against a wide range of eddy Abstract The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) was launched to the International Space Station on 29 June 2018 by the National Aeronautics and Space Administration (NASA). The primary science focus of ECOSTRESS is centered on evapotranspiration (ET), which is produced as Level-3 (L3) latent heat flux (LE) data products. These data are generated from the Level-2 land surface temperature and emissivity product (L2_LSTE), in conjunction with ancillary surface and atmospheric data. Here, we provide the first validation (Stage 1, preliminary) of the global ECOSTRESS clear-sky ET product (L3_ET_PT-JPL, Version 6.0) against LE measurements at 82 eddy covariance sites around the world. Overall, the ECOSTRESS ET product performs well against the site measurements (clear-sky instantaneous/time of overpass: r 2 = 0.88; overall bias = 8%; normalized root-mean-square error, RMSE = 6%). ET uncertainty was generally consistent across climate zones, biome types, and times of day (ECOSTRESS samples the diurnal cycle), though temperate sites are overrepresented. The 70-m-high spatial resolution of ECOSTRESS improved correlations by 85%, and RMSE by 62%, relative to 1-km pixels. This paper serves as a reference for the ECOSTRESS L3 ET accuracy and Stage 1 validation status for subsequent science that follows using these data.

Terrestrial open water evaporation is difficult to measure both in situ and remotely yet is critical for understanding changes in reservoirs, lakes, and inland seas from human management and climatically altered hydrological cycling. Multiple satellite missions and data systems (e.g., ECOSTRESS, OpenET) now operationally produce evapotranspiration (ET), but the open water evaporation data produced over millions of water bodies are algorithmically produced differently than the main ET data and are often overlooked in evaluation. Here, we evaluated the open water evaporation algorithm, AquaSEBS, used by ECOSTRESS and OpenET against 19 in situ open water evaporation sites from around the world using MODIS and Landsat data, making this one of the largest open water evaporation validations to date. Overall, our remotely sensed open water evaporation retrieval captured some variability and magnitude in the in situ data when controlling for high wind events (instantaneous: r2 = 0.71; bias = 13% of mean; RMSE = 38% of mean). Much of the instantaneous uncertainty was due to high wind events (u > mean daily 7.5 m·s−1) when the open water evaporation process shifts from radiatively-controlled to atmospherically-controlled; not accounting for high wind events decreases instantaneous accuracy significantly (r2 = 0.47; bias = 36% of mean; RMSE = 62% of mean). However, this sensitivity minimizes with temporal integration (e.g., daily RMSE = 1.2–1.5 mm·day−1). To benchmark AquaSEBS, we ran a suite of 11 machine learning models, but found that they did not significantly improve on the process-based formulation of AquaSEBS suggesting that the remaining error is from a combination of the in situ evaporation measurements, forcing data, and/or scaling mismatch; the machine learning models were able to predict error well in and of itself (r2 = 0.74). Our results provide confidence in the remotely sensed open water evaporation data, though not without uncertainty, and a foundation by which current and future missions may build such operational data.

No abstract

No abstract

No abstract