Graphene nanoribbons-narrow and straight-edged stripes of graphene, or single-layer graphite-are predicted to exhibit electronic properties that make them attractive for the fabrication of nanoscale electronic devices. In particular, although the two-dimensional parent material graphene exhibits semimetallic behaviour, quantum confinement and edge effects should render all graphene nanoribbons with widths smaller than 10 nm semiconducting. But exploring the potential of graphene nanoribbons is hampered by their limited availability: although they have been made using chemical, sonochemical and lithographic methods as well as through the unzipping of carbon nanotubes, the reliable production of graphene nanoribbons smaller than 10 nm with chemical precision remains a significant challenge. Here we report a simple method for the production of atomically precise graphene nanoribbons of different topologies and widths, which uses surface-assisted coupling of molecular precursors into linear polyphenylenes and their subsequent cyclodehydrogenation. The topology, width and edge periphery of the graphene nanoribbon products are defined by the structure of the precursor monomers, which can be designed to give access to a wide range of different graphene nanoribbons. We expect that our bottom-up approach to the atomically precise fabrication of graphene nanoribbons will finally enable detailed experimental investigations of the properties of this exciting class of materials. It should even provide a route to graphene nanoribbon structures with engineered chemical and electronic properties, including the theoretically predicted intraribbon quantum dots, superlattice structures and magnetic devices based on specific graphene nanoribbon edge states.

Single-walled carbon nanotubes offer high sensitivity and very low power consumption when used as field-effect transistors in nanosensors. Suspending nanotubes between pairs of contacts, rather than attaching them to a surface, has many advantages in chemical, optical or displacement sensing applications, as well as for resonant electromechanical systems. Suspended nanotubes can be integrated into devices after nanotube growth, but contamination caused by the accompanying additional process steps can change device properties. Ultraclean suspended nanotubes can also be grown between existing device contacts, but high growth temperatures limit the choice of metals that can be used as contacts. Moreover, when operated in ambient conditions, devices fabricated by either the post- or pre-growth approach typically exhibit gate hysteresis, which makes device behaviour less reproducible. Here, we report the operation of nanotube transistors in a humid atmosphere without hysteresis. Suspended, individual and ultraclean nanotubes are grown directly between unmetallized device contacts, onto which palladium is then evaporated through self-aligned on-chip shadow masks. This yields pairs of needle-shaped source/drain contacts that have been theoretically shown to allow high nanotube-gate coupling and low gate voltages. This process paves the way for creating ultrasensitive nanosensors based on pristine suspended nanotubes.

We present a suspended carbon nanotube gas sensor that senses NO2 at ambient temperature and recovers from gas exposure at an extremely low power of 2.9 μW by exploiting the self-heating effect for accelerated gas desorption. The recovery time of 10 min is two orders of magnitude faster than non-heated recovery at ambient temperature. This overcomes an important bottleneck for the practical application of carbon nanotube gas sensors. Furthermore, the method is easy to implement in sensor systems and requires no additional components, paving the way for ultra-low power, compact, and highly sensitive gas sensors.

Coupling carbon nanotube devices to microwave circuits offers a significant increase in bandwidth (BW) and signal-to-noise ratio. These facilitate fast non-invasive readouts important for quantum information processing, shot noise and correlation measurements. However, creation of a device that unites a low-disorder nanotube with a low-loss microwave resonator has so far remained a challenge, due to fabrication incompatibility of one with the other. Employing a mechanical transfer method, we successfully couple a nanotube to a gigahertz superconducting matching circuit and thereby retain pristine transport characteristics such as the control over formation of, and coupling strengths between, the quantum dots. Resonance response to changes in conductance and susceptance further enables quantitative parameter extraction. The achieved near matching is a step forward promising high-BW noise correlation measurements on high impedance devices such as quantum dot circuits.

The successful dispersion and large-scale parallel assembly of individual surface-synthesized large-diameter (1-3 nm) single-walled carbon nanotubes (SWNTs), grown by chemical vapor deposition (CVD), is demonstrated. SWNTs are removed from the growth substrate by a short, low-energy ultrasonic pulse to produce ultrapure long-term stable surfactant-stabilized solutions. Subsequent dielectrophoretic deposition bridges individual, straight, and long SWNTs between two electrodes. Electrical characterization on 223 low-resistance devices (R(average) approximately 200 kOmega) evidences the high quality of the SWNT raw material, prepared solution, and contact interface. The research reported herein provides an important framework for the large-scale industrial integration of carbon nanotube-based devices, sensors, and applications.