As part of the conceptual and preliminary design processes of the Thirty Meter Telescope (TMT), the TMT site testing team has spent the last five years measuring the atmospheric properties of five candidate mountains in North and South America with an unprecedented array of instrumentation. The site testing period was preceded by several years of analyses selecting the five candidates, Cerros Tolar, Armazones and Tolonchar in northern Chile; San Pedro Martir in Baja California, Mexico and the 13 North (13N) site on Mauna Kea, Hawaii. Site testing was concluded by the selection of two remaining sites for further consideration, Armazones and Mauna Kea 13N. It showed that all five candidates are excellent sites for an extremely large astronomical observatory and that none of the sites stands out as the obvious and only logical choice based on its combined properties. This is the first article in a series discussing the TMT site testing project.Comment: Accepted for publication in PASP, April 2009 issu

Ellesmere Island, at the most northerly tip of Canada, possesses the highest mountain peaks within 10 degrees of the pole. The highest is 2616 m, with many summits over 1000 m, high enough to place them above a stable low-elevation thermal inversion that persists through winter darkness. Our group has studied four mountains along the northwestern coast which have the additional benefit of smooth onshore airflow from the ice-locked Arctic Ocean. We deployed small robotic site testing stations at three sites, the highest of which is over 1600 m and within 8 degrees of the pole. Basic weather and sky clarity data for over three years beginning in 2006 are presented here, and compared with available nearby sea-level data and one manned mid-elevation site. Our results point to coastal mountain sites experiencing good weather: low median wind speed, high clear-sky fraction and the expectation of excellent seeing. Some practical aspects of access to these remote locations and operation and maintenance of equipment there are also discussed.

The Thirty Meter Telescope (TMT) first light instrument IRIS (Infrared Imaging Spectrograph) will complete its preliminary design phase in 2016. The IRIS instrument design includes a near-infrared (0.85 -2.4 micron) integral field spectrograph (IFS) and imager that are able to conduct simultaneous diffraction-limited observations behind the advanced adaptive optics system NFIRAOS. The IRIS science cases have continued to be developed and new science studies have been investigated to aid in technical performance and design requirements. In this development phase, the IRIS science team has paid particular attention to the selection of filters, gratings, sensitivities of the entire system, and science cases that will benefit from the parallel mode of the IFS and imaging camera. We present new science cases for IRIS using the latest end-to-end data simulator on the following topics: Solar System bodies, the Galactic center, active galactic nuclei (AGN), and distant gravitationally-lensed galaxies. We then briefly discuss the necessity of an advanced data management system and data reduction pipeline.

Adaptive optics (AO) is essential for many elements of the science case for the Thirty Meter Telescope (TMT). The initial requirements for the observatory's facility AO system include diffraction-limited performance in the near IR, with 50 per cent sky coverage at the galactic pole. Point spread function uniformity and stability over a 30 arc sec field-ofview are also required for precision photometry and astrometry. These capabilities will be achieved via an order 60x60 multi-conjugate AO system (NFIRAOS) with two deformable mirrors, six laser guide star wavefront sensors, and three low-order, IR, natural guide star wavefront sensors within each client instrument. The associated laser guide star facility (LGSF) will employ 150W of laser power at a wavelength of 589 nm to generate the six laser guide stars.We provide an update on the progress in designing, modeling, and validating these systems and their components over the last two years. This includes work on the layouts and detailed designs of NFIRAOS and the LGSF; fabrication and test of a full-scale prototype tip/tilt stage (TTS); Conceptual Designs Studies for the real time controller (RTC) hardware and algorithms; fabrication and test of the detectors for the laser-and natural-guide star wavefront sensors; AO system modeling and performance optimization; lab tests of wavefront sensing algorithms for use with elongated laser guide stars; and high resolution LIDAR measurements of the mesospheric sodium layer. Further details may be found in specific papers on each of these topics.