A position tracking control system is implemented by utilizing parallel-connected on/off valve series. The pulse code modulation method is used to achieve stepwise flow control and four valve series, each having four two-way solenoid valves, are used. A cost function based controller is used to control simultaneously and independently flow paths from supply to cylinder chambers and from chambers to tank. It is shown that controllability can be improved especially at low velocities by allowing three or four valve series to be open simultaneously instead of using classical inflowoutflow control.

This article presents digital fluid power as a new branch of fluid power which offers high potential for innovative solutions. The variety of digital concepts is quite large and digital concepts have long been successfully applied in low-power applications. Research and development is now becoming more intensive, being undertaken by several research groups and also more and more in industry. First applications will be brought to industry soon. A successful application requires new components, a sound understanding of system and new control principles.

No abstract

No abstract

Digital hydraulic valve system is a new kind of hydraulic control valve assembly, which has potential to save energy and improve performance of valve controlled actuators. The typical digital valve system has 4-6 parallel connected on/off valves per control edge totaling 16-24 valves in the four-way valve configuration. The flow capacities of the parallel connected valves are set according to the powers of two such that it is possible to achieve 2 N different flow rates with N valves. An alternative approach is to use equally sized valves, which means that N parallel connected valves give only N+1 different flow rates. This approach has several benefits, but the number of valves becomes very large. This paper shows that it is possible to implement valve assembly having 128 miniaturized valves, such that it can be installed instead of traditional CETOP3 servo or proportional valve. Careful electromagnetic optimization and mechatronic design are used together with novel manufacturing methods and new type of power electronics. The prototype is build and experimentally studied and results show that the performance of this kind of digital valve system is superior to traditional four-way control valves in terms of response time and fault tolerance.