No abstract

No abstract

No abstract

Abstract.The Spiky Central Receiver Air Pre-heater (SCRAP) receiver is a novel external tubular metallic central receiver concept. The SCRAP receiver is designed to increase an air-receivers solar-thermal performance. This is aimed to be achieved by enhancing heat transfer to the pressurized air-stream within the absorber assemblies (spikes) by utilizing an internally finned tube geometry. The fin shape is defined to create rectangular ducts as passages for the air flow, therewith a high heat transfer coefficient. The spikes are arranged in such a way that they trap incoming concentrated radiation (reduce reflection losses) and minimize thermal radiation losses from the receiver to ambient.In previous work, the modeling of a SCRAP receiver was discussed on. This included the modeling of the internal air flow and heat transfer within a spike, analysis of the optical characteristics of a SCRAP receiver and the impingement heat transfer capabilities in the spike tip (exposed to the highest flux). Further, analysis of the thermal interaction of spikes with one another and with ambient (convective and radiative heat loss) permitted drawing of first conclusions of the receiver performance potential.To validate the models predicting the pressurized air flow and heat transfer within a spike, an experimental test setup was designed, constructed and built at the heat transfer laboratories at Stellenbosch University. This work introduces the design of the test setup and will discuss preliminary results obtained during its commissioning. From first analysis the predictions made for the pressure drop within the internally finned section appear adequate. The heat transfer behavior will require further detailed analysis to develop sufficient confidence to allow for conclusions. Initial results, however, show good general agreement between measured and simulated data.

No abstract