No abstract

Room temperature ionic liquids (RTILs) are emerging as attractive and green solvents for lignocellulosic biomass pretreatment. The unique solvating properties of RTILs foster the disruption of the 3D network structure of lignin, cellulose, and hemicellulose, which allows high yields of fermentable sugars to be produced in subsequent enzymatic hydrolysis. In the current review, we summarize the physicochemical properties of RTILs that make them effective solvents for lignocellulose pretreatment including mechanisms of interaction between lignocellulosic biomass subcomponents and RTILs. We also highlight several recent strategies that exploit RTILs and generate high yields of fermentable sugars suitable for downstream biofuel production, and address new opportunities for use of lignocellulosic components, including lignin. Finally, we address some of the challenges that remain before large-scale use of RTILs may be achieved.

Ionic liquids (ILs) have emerged as attractive solvents for lignocellulosic biomass pretreatment in the production of biofuels and chemical feedstocks. However, the high cost of ILs is a key deterrent to their practical application. Here, we show that acetate based ILs are effective in dramatically reducing the recalcitrance of corn stover toward enzymatic polysaccharide hydrolysis even at loadings of biomass as high as 50% by weight. Under these conditions, the IL serves more as a pretreatment additive rather than a true solvent. Pretreatment of corn stover with 1-ethyl-3-methylimidizolium acetate ([Emim] [OAc]) at 125 ± 5°C for 1 h resulted in a dramatic reduction of cellulose crystallinity (up to 52%) and extraction of lignin (up to 44%). Enzymatic hydrolysis of the IL-treated biomass was performed with a common commercial cellulase/xylanase from Trichoderma reesei and a commercial β-glucosidase, and resulted in fermentable sugar yields of ∼80% for glucose and ∼50% for xylose at corn stover loadings up to 33% (w/w) and 55% and 34% for glucose and xylose, respectively, at 50% (w/w) biomass loading. Similar results were observed for the IL-facilitated pretreatment of switchgrass, poplar, and the highly recalcitrant hardwood, maple. At 4.8% (w/w) corn stover, [Emim][OAc] can be readily reused up to 10 times without removal of extracted components, such as lignin, with no effect on subsequent fermentable sugar yields. A significant reduction in the amount of IL combined with facile recycling has the potential to enable ILs to be used in large-scale biomass pretreatment.