An original simplified finite element model is proposed to simulate the effects of non-penetrating ballistic impacts causing the so-called bullet splash phenomenon (complete bullet fragmentation), while no fragmentation is caused to the target. The model is based on the Arbitrary Lagrangian Eulerian formulation (ALE) and it simulates the impact as a fluid-structure interaction. The bullet splash phenomenon has been tested by experimental analyses of AISI 304L plates impacted by 9x21 FMJ (full metal jacket) bullets. The model has been developed with the aim of creating a simplified approach to be used in the industry and forensic sciences to simulate the non-penetrating interaction of soft impactors with hard targets. Comparisons between evidence and simulation results lead to the conclusion that the proposed approach can be used in a conservative way to estimate both local and global effects of bullet-splash phenomena.

An original simplified formula is proposed to estimate the load history caused by ballistic impacts characterized by the so-called bullet splash phenomenon, consisting in the complete bullet fragmentation with no penetration of the target. The formula is based on the progressive momentum variation of the mass of the bullet impacting on a planar plate normal to the impact direction. The method aims at creating a simplified approach to assess the response of structures by means of explicit finite element simulations without the need of modelling the interaction between impactor and target. The results demonstrate that the proposed method can be used to estimate the forces generated by bullet-splash phenomena of 9x21mm full metal jacket bullets and effectively applied to finite element simulations allowing significant reductions in computational cost.

An original simplified constitutive model is proposed to simulate the effects of ballistic impacts on blocks of synthetic muscle simulant based on mineral oil and styrene ethylene-butylene styrene polymers (SEBS) as a convenient substitute for Fackler ballistic gelatin. The model is based on a quasi-static elastic-plastic model associated with hydrodynamic properties regulated by a polynomial equation of state. The paper illustrates the development and experimental validation of the model to simulate 9x21mm FMJ round-nose, 7.62x39 mm FMJ, and 5.56x45 mm NATO bullets penetrating 145x145x400 mm gel blocks. All material parameters are provided to be implemented in built-in LS-Dyna keywords. The validation confirms the effectiveness of the model and suggests possible further developments. The work also confirms the tested synthetic gel as a valid and convenient substitute for Fackler 10% ballistic gelatin at 4 °C.

The study focuses on testing a simplified way of estimating the resultant force due to ballistic impacts resulting in a full fragmentation of the impactor with no penetration of the target. The method is intended to be useful for the parsimonious structural assessment of military aircrafts with integrated ballistic protection systems by means of large scale explicit finite element simulations. The research investigates the effectiveness of the method in allowing the prediction of the fields of plastic deformation collected by hard steel plates impacted by a wide range of semi-jacketed, monolithic, and full metal jacket .308 Winchester rifle bullets. The outcomes show the effectiveness of the method being strictly related to the full compliance of the considered cases with the bullet-splash hypotheses. The study therefore suggests the application of the load history approach only after careful experimental investigations on the specific impactor–target interactions.