Abstract. This study assesses the potential of 2 to 10 km resolution imagery of CO 2 concentrations retrieved from the shortwave infrared measurements of a space-borne passive spectrometer for monitoring the spatially integrated emissions from the Paris area. Such imagery could be provided by missions similar to CarbonSat, which was studied as a candidate Earth Explorer 8 mission by the European Space Agency (ESA). This assessment is based on observing system simulation experiments (OSSEs) with an atmospheric inversion approach at city scale. The inversion system solves for hourly city CO 2 emissions and natural fluxes, or for these fluxes per main anthropogenic sector or ecosystem, during the 6 h before a given satellite overpass. These 6 h correspond to the period during which emissions produce CO 2 plumes that can be identified on the image from this overpass. The statistical framework of the inversion accounts for the existence of some prior knowledge with 50 % uncertainty on the hourly or sectorial emissions, and with ∼ 25 % uncertainty on the 6 h mean emissions, from an inventory based on energy use and carbon fuel consumption statistics. The link between the hourly or sectorial emissions and the vertically integrated column of CO 2 observed by the satellite is simulated using a coupled flux and atmospheric transport model. This coupled model is built with the information on the spatial and temporal distribution of emissions from the emission inventory produced by the local air-quality agency (Airparif) and a 2 km horizontal resolution atmospheric transport model. Tests are conducted for different realistic simulations of the spatial coverage, resolution, precision and accuracy of the imagery from sun-synchronous polar-orbiting missions, corresponding to the specifications of CarbonSat and Sentinel-5 or extrapolated from these specifications. First, OSSEs are conducted with a rather optimistic configuration in which the inversion system is perfectly informed about the statistics of the limited number of error sources. These OSSEs indicate that the image resolution has to be finer than 4 km to decrease the uncertainty in the 6 h mean emissions by more than 50 %. More complex experiments assess the impact of more realistic error estimates that current inversion methods do not properly account for, in particular, the systematic measurement errors with spatially correlated patterns. These experiments highlight the difficulty to improve current knowledge on CO 2 emissions for urban areas like Paris with CO 2 observations from satellites, and call for more technological innovations in the remote sensing of vertically integrated columns of CO 2 and in the inversion systems that exploit it.

(2015). The Greenhouse Gas Climate Change Initiative (GHG-CCI): comparison and quality assessment of near-surface-sensitive satellite-derived CO2 and CH4 global data sets. Remote Sensing of Environment: an interdisciplinary journal, 162 344-362. The Greenhouse Gas Climate Change Initiative (GHG-CCI): comparison and quality assessment of near-surface-sensitive satellite-derived CO2 and CH4 global data sets Abstract The GHG-CCI project is one of several projects of the European Space Agency's (ESA) Climate Change Initiative (CCI). The goal of the CCI is to generate and deliver data sets of various satellite-derived Essential Climate Variables (ECVs) in line with GCOS (Global Climate Observing System) requirements. The "ECV Greenhouse Gases" (ECV GHG) is the global distribution of important climate relevant gases-atmospheric CO2 and CH4-with a quality sufficient to obtain information on regional CO2 and CH4 sources and sinks. Two satellite instruments deliver the main input data for GHG-CCI: SCIAMACHY/ENVISAT and TANSO-FTS/GOSAT. The first order priority goal of GHG-CCI is the further development of retrieval algorithms for near-surface-sensitive column-averaged dry air mole fractions of CO2 and CH4, denoted XCO2 and XCH4, to meet the demanding user requirements. GHG-CCI focuses on four core data products: XCO2 from SCIAMACHY and TANSO and XCH4 from the same two sensors. For each of the four core data products at least two candidate retrieval algorithms have been independently further developed and the corresponding data products have been quality-assessed and inter-compared. This activity is referred to as "Round Robin" (RR) activity within the CCI. The main goal of the RR was to identify for each of the four core products which algorithms should be used to generate the Climate Research Data Package (CRDP). The CRDP will essentially be the first version of the ECV GHG. This manuscript gives an overview of the GHG-CCI RR and related activities. This comprises the establishment of the user requirements, the improvement of the candidate retrieval algorithms and comparisons with ground-based observations and models. The manuscript summarizes the final RR algorithm selection decision and its justification. Comparison with ground-based Total Carbon Column Observing Network (TCCON) data indicates that the "breakthrough" single measurement precision requirement has been met for SCIAMACHY and TANSO XCO2 (< 3 ppm) and TANSO XCH4 (< 17 ppb). The achieved relative accuracy for XCH4 is 3-15 ppb for SCIAMACHY and 2-8 ppb for TANSO depending on algorithm and time period. Meeting the 0.5 ppm systematic error requirement for XCO2 remains a challenge: approximately 1 ppm has been achieved at the validation sites but also larger differences have been found in regions remote from TCCON. More research is needed to identify the causes for the observed differences. In this context GHG-CCI suggests taking advantage of the ensemble of existing data products, for example, via the EnseMble Median Algorithm (EMMA). Abstract 41 The GHG-CCI pr...

Abstract. Currently, 52 % of the world's population resides in urban areas and as a consequence, approximately 70 % of fossil fuel emissions of CO 2 arise from cities. This fact, in combination with large uncertainties associated with quantifying urban emissions due to lack of appropriate measurements, makes it crucial to obtain new measurements useful to identify and quantify urban emissions. This is required, for example, for the assessment of emission mitigation strategies and their effectiveness. Here, we investigate the potential of a satellite mission like Carbon Monitoring Satellite (CarbonSat) which was proposed to the European Space Agency (ESA) to retrieve the city emissions globally, taking into account a realistic description of the expected retrieval errors, the spatiotemporal distribution of CO 2 fluxes, and atmospheric transport. To achieve this, we use (i) a high-resolution modelling framework consisting of the Weather Research Forecasting model with a greenhouse gas module (WRF-GHG), which is used to simulate the atmospheric observations of column-averaged CO 2 dry air mole fractions (XCO 2 ), and (ii) a Bayesian inversion method to derive anthropogenic CO 2 emissions and their errors from the CarbonSat XCO 2 observations. We focus our analysis on Berlin, Germany using CarbonSat's cloud-free overpasses for 1 reference year. The dense (wide swath) CarbonSat simulated observations with high spatial resolution (approximately 2 km × 2 km) permits one to map the city CO 2 emission plume with a peak enhancement of typically 0.8-1.35 ppm relative to the background. By performing a Bayesian inversion, it is shown that the random error (RE) of the retrieved Berlin CO 2 emission for a single overpass is typically less than 8-10 Mt CO 2 yr −1 (about 15-20 % of the total city emission). The range of systematic errors (SEs) of the retrieved fluxes due to various sources of error (measurement, modelling, and inventories) is also quantified. Depending on the assumptions made, the SE is less than about 6-10 Mt CO 2 yr −1 for most cases. We find that in particular systematic modelling-related errors can be quite high during the summer months due to substantial XCO 2 variations caused by biogenic CO 2 fluxes at and around the target region. When making the extreme worst-case assumption that biospheric XCO 2 variations cannot be modelled at all (which is overly pessimistic), the SE of the retrieved emission is found to be larger than 10 Mt CO 2 yr −1 for about half of the sufficiently cloud-free overpasses, and for some of the overpasses we found that SE may even be on the order of magnitude of the anthropogenic emission. This indicates that biogenic XCO 2 variations cannot be neglected but must be considered during forward and/or inverse modelling. Overall, we conclude that a satellite mission such as CarbonSat has high potential to obtain city-scale CO 2 emissions as needed to enhance our current understanding of anthropogenic carbon fluxes, and that CarbonSat-like satellites should be an important component of ...

Abstract. Despite its key role in climate change, large uncertainties persist in our knowledge of the anthropogenic emissions of carbon dioxide (CO2) and no global observing system exists that allows us to monitor emissions from localized CO2 sources with sufficient accuracy. The Orbiting Carbon Observatory-2 (OCO-2) satellite allows retrievals of the column-average dry-air mole fractions of CO2 (XCO2). However, regional column-average enhancements of individual point sources are usually small, compared to the background concentration and its natural variability, and often not much larger than the satellite's measurement noise. This makes the unambiguous identification and quantification of anthropogenic emission plume signals challenging. NO2 is co-emitted with CO2 when fossil fuels are combusted at high temperatures. It has a short lifetime on the order of hours so that NO2 columns often greatly exceed background and noise levels of modern satellite sensors near sources, which makes it a suitable tracer of recently emitted CO2. Based on six case studies (Moscow, Russia; Lipetsk, Russia; Baghdad, Iraq; Medupi and Matimba power plants, South Africa; Australian wildfires; and Nanjing, China), we demonstrate the usefulness of simultaneous satellite observations of NO2 and XCO2. For this purpose, we analyze co-located regional enhancements of XCO2 observed by OCO-2 and NO2 from the Sentinel-5 Precursor (S5P) satellite and estimate the CO2 plume's cross-sectional fluxes. We take advantage of the nearly simultaneous NO2 measurements with S5P's wide swath and small measurement noise by identifying the source of the observed XCO2 enhancements, excluding interference with remote upwind sources, allowing us to adjust the wind direction, and by constraining the shape of the CO2 plumes. We compare the inferred cross-sectional fluxes with the Emissions Database for Global Atmospheric Research (EDGAR), the Open-Data Inventory for Anthropogenic Carbon dioxide (ODIAC), and, in the case of the Australian wildfires, with the Global Fire Emissions Database (GFED). The inferred cross-sectional fluxes range from 31 MtCO2 a−1 to 153 MtCO2 a−1 with uncertainties (1σ) between 23 % and 72 %. For the majority of analyzed emission sources, the estimated cross-sectional fluxes agree, within their uncertainty, with either EDGAR or ODIAC or lie somewhere between them. We assess the contribution of multiple sources of uncertainty and find that the dominating contributions are related to the computation of the effective wind speed normal to the plume's cross section. The flux uncertainties are expected to be reduced by the planned European Copernicus anthropogenic CO2 monitoring mission (CO2M), which will provide not only precise measurements with high spatial resolution but also imaging capabilities with a wider swath of simultaneous XCO2 and NO2 observations. Such a mission, particularly if performed by a constellation of satellites, will deliver CO2 emission estimates from localized sources at an unprecedented frequency and level of accuracy.

Abstract. The switch from the use of coal to natural gas or oil for energy generation potentially reduces greenhouse gas emissions and thus the impact on global warming and climate change because of the higher energy creation per CO2 molecule emitted. However, the climate benefit over coal is offset by methane (CH4) leakage from natural gas and petroleum systems, which reverses the climate impact mitigation if the rate of fugitive emissions exceeds the compensation point at which the global warming resulting from the leakage and the benefit from the reduction of coal combustion coincide. Consequently, an accurate quantification of CH4 emissions from the oil and gas industry is essential to evaluate the suitability of natural gas and petroleum as bridging fuels on the way to a carbon-neutral future. We show that regional CH4 release from large oil and gas fields can be monitored from space by using dense daily recurrent measurements of the TROPOspheric Monitoring Instrument (TROPOMI) onboard the Sentinel-5 Precursor satellite to quantify emissions and leakage rates. The average emissions for the time period 2018/2019 from the five most productive basins in the United States, the Permian, Appalachian, Eagle Ford, Bakken, and Anadarko, are estimated to be 3.18±1.13, 2.36±0.88, 1.37±0.63, 0.89±0.56, and 2.74±0.74 Mt yr−1, respectively. This corresponds to CH4 leakage rates relative to the associated production between 1.2 % and 1.4 % for the first four production regions, which are consistent with bottom-up estimates and likely fall below the break-even leakage rate for immediate climate benefit. For the Anadarko Basin, the fugitive emission rate is larger and amounts to 3.9±1.1 %, which likely exceeds the break-even rate for immediate benefit and roughly corresponds to the break-even rate for a 20-year time horizon. The determined values are smaller than previously derived satellite-based leakage rates for the time period 2009–2011, which was an early phase of hydraulic fracturing, indicating that it is possible to improve the climate footprint of the oil and gas industry by adopting new technologies and that efforts to reduce methane emissions have been successful. For two of the world's largest natural gas fields, Galkynysh and Dauletabad in Turkmenistan, we find collective methane emissions of 3.26±1.17 Mt yr−1, which corresponds to a leakage rate of 4.1±1.5 %, suggesting that the Turkmen energy industry is not employing methane emission avoidance strategies and technologies as successfully as those currently widely used in the United States. The leakage rates in Turkmenistan and in the Anadarko Basin indicate that there is potential to reduce fugitive methane emissions from natural gas and petroleum systems worldwide. In particular, relatively newly developed oil and gas plays appear to have larger leakage rates compared to more mature production areas.