We demonstrate supercontinuum generation over an octave spaning from 1055 to 2155 nm on the highly nonlinear aluminum gallium arsenide (AlGaAs)-on-insulator platform. This is enabled by the generation of two dispersive waves in a 3-mm-long dispersion-engineered nano-waveguide. The waveguide is pumped at telecom wavelengths (1555 nm) with 3.6 pJ femtosecond pulses. We experimentally validate the coherence of the generated supercontinuum around the pump wavelength (1450–1750 nm), and our numerical simulation shows a high degree of coherence over the full spectrum.

Silicon photonics (SiPh) is a disruptive technology in the field of integrated photonics and has experienced rapid development over the past two decades. Various high-performance Si and Ge/Si-based components have been developed on this platform that allow for complex photonic integrated circuits (PICs) with small footprint. These PICs have found use in a wide range of applications. Nevertheless, some non-native functions are still desired, despite the versatility of Si, to improve the overall performance of Si PICs and at the same time cut the cost of the eventual Si photonic system-on-chip. Heterogeneous integration is verified as an effective solution to address this issue, e.g. through die-wafer-bonding and flip-chip. In this paper, we discuss another technology, micro-transfer printing, for the integration of nonnative material films/opto-electronic components on SiPh-based platforms. This technology allows for efficient use of non-native materials and enables the (co-)integration of a wide range of materials/devices on wafer scale in a massively parallel way. In this paper we review some of the recent developments in the integration of non-native optical functions on Si photonic platforms using micro-transfer printing.

III-V semiconductor mid-infrared photodetectors based on intersubband transitions hold a great potential for ultra-high-speed operation up to several hundreds of GHz. In this work we exploit a ~350nm-thick GaAs/Al0.2Ga0.8As multi-quantum-well heterostructure to demonstrate heterodyne detection at l~10µm with a nearly flat frequency response up to 70GHz at room temperature, solely limited by the measurement system bandwidth. This is the broadest RFbandwidth reported to date for a quantum-well mid-infrared photodetector. Responsivities of 0.15A/W and 1.5A/W are obtained at 300K and 77K respectively. To allow ultrafast operation and illumination at normal incidence, the detector consists of a 50W coplanar waveguide, monolithically integrated with a 2D-array of sub-wavelength patch antennas, electrically interconnected by suspended wires. With this device architecture we obtain a parasitic capacitance of ~30fF, corresponding to the static capacitance of the antennas, yielding a RClimited 3dB cutoff frequency >150GHz at 300K, extracted with a small-signal equivalent circuit model. Using this model, we quantitively reproduce the detector frequency response and find intrinsic roll-off time constants as low as 1ps at room temperature.