Objective: The purpose of this study is to evaluate the quality control of marketed tablets containing propranolol hydrochloride available on the Iraqi market and manufactured by different companies. Methods: Different batches of propranolol hydrochloride 40 mg tablets were assessed using quality control tests. Weight variation, diameter, thickness, friability, disintegration time and dissolution study were carried out in this study. Results: Based on the data obtained in this study, all brands of PPL available on the Iraqi market showed weight variation within the acceptable limit of USP. Marketed products of Becardin and Propranolol lie within the acceptable limit of hardness and Inderal was observed to be slightly higher than the normal upper range of USP. Diameter and thickness for all brands were almost the same, except the diameter of Becardin was slightly higher and friability was zero for all brands. All brands demonstrated a time of disintegration of fewer than 30 min. The tested marketed propranolol products; Inderal, Procard, Becardin and Propranolol showed cumulative drug release of 90.08%, 94.46%, 92.4% and 79.51%, respectively at the end of the first 20 min. This variation in the release profile of marketed tablets of Propranolol HCl might be attributed to the excipients present in the marketed tablets where some of these excipients may behave as a disintegrant and enhance dissolution rate while others may act as dissolution retardants. Conclusion: All marketed tablets of Propranolol HCl employed in this study were produced within the standard criteria of tablet manufacturing. Evaluation of quality control of these selected tablets showed acceptable pharmaceutical properties that lie within the limits of USP.

Objective: The aim of this study was to formulate, evaluate and characterise nanoemulsion formulation containing a lipophilic drug, Ketoprofen. Methods: Nanoemulsion formulations composed of oil, surfactant, co-surfactants and Ketoprofen were prepared. In all formulations, the percent of surfactants, as well as oil, was varied while the amount of Ketoprofen kept constant. Solubility studies were conducted to select the oil, surfactant and cosurfactant. Phase diagrams were constructed using the aqueous phase titration method. Formulations were selected from the phase diagrams. The prepared nanoemulsions were subjected to different thermodynamic stability tests. Results: Following optimization, the F7 formula (10% oil, 3:1 surfactant to co-surfactant) was thermodynamically stable, with a droplet size of 105 nm and a zeta potential of-26.21 mV. In vitro release study showed that the drug release pattern from formulations F5, F6, F7, F8, F9 and F10 was higher than that of F1, F2, F3 and F4. Conclusion: The present work demonstrates that the nanoemulsion is a promising drug delivery system approach for the enhancement of solubility and dissolution rate of Ketoprofen.

Objective: This research was performed to assess the quality of different marketed tablets having mefenamic acid (500 mg). The selected tablets are produced by numerous companies and presented in the Iraqi pharmaceutical marketplace. Methods: Different batches of mefenamic acid conventional tablets were exposed for several tests of quality control. These evaluation tests include hardness, weight variation, friability, disintegration time, drug content, and drug dissolution profile. The properties of these quality tests were made conferring to the specification of USP-pharmacopeia. Results: The data of this study indicate that each tablet of mefenamic acid batches conformed to the requirement of USP pharmacopeia, the hardness was (6.87-8.06 Kg/cm2), and the drug content results were (90.666-99.214%) within USP limitation. The data of disintegration time and weight uniformity were agreeable with pharmacopeia and the in vitro release assay showed that the release of each mefenamic acid marketed tablet was highest than (80 %) in 45 min, which reproducing compliance with the USP pharmacopeia's limitation. Conclusion: From this study, it was proved that all of the marketed brands of mefenamic acid tablets meet the standard character in the USP pharmacopeia for in vitro quality control tests.

Objective: This study was employed to evaluate the quality of marketed oral tablets containing clopidogrel bisulfate. Tablets produced by various companies and commercialized in the Iraq market were used in the study. Methods: Batches of clopidogrel bisulfate conventional tablets (containing 75 mg of drug) were exposed to the quality control tests. These tests involved friability, weight variation, hardness, drug content, disintegration time, and in vitro release study; these tests were conducted depending on USP pharmacopeia. Results: The data indicate that all batches of clopidogrel bisulfate complied with the limitations of USP pharmacopeia for variation of weight, results of the hardness of tablets were 7.2-9.6 Kg/cm2. Friability value (% loss) was less than one, which was within the required limits. The time of disintegration was less than 25 min in both artificial gastric fluid (AGF) and artificial intestinal fluid (AIF). Drug content was observed between 97.1 % and 99.8 %, indicating compliance with the limits of pharmacopeia (85-115 %). An in vitro release study of batches was greater than 80 % within 25 min. Conclusion: All batches of clopidogrel bisulfate were manufactured within the criteria of tablet manufacturing. The quality control tests of tablets showed acceptable pharmaceutical properties (effectiveness and safety) that lie within the limits of USP pharmacopeia.

No abstract