A synthetic polyethylene glycol-molybdenum disulfide (PEG@MoS2) composite was prepared using a simple method, and the application of this material in dispersive solid-phase extraction (DSPE) was investigated for the enrichment of eight sulfonamides (SAs) in milk samples. The composite was characterized by energy dispersive spectroscopy, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and Brunauer–Emmett–Teller measurements. The results showed that the MoS2 synthesized in the presence of PEG has the advantage of a larger surface area and that the adsorption effect of this MoS2 was enhanced. After extraction, the eight SAs were separated by capillary zone electrophoresis with a good linear relationship (R2 > 0.9902) in the range of 0.3–30 µg ml−1 and good precision (between 0.32% and 9.83%). Additionally, good recoveries (between 60.52% and 110.91%) were obtained for the SAs in the milk samples. The developed PEG@MoS2-based DSPE method could be applied for the enrichment of SAs in real milk samples.

A general solid-phase extraction (SPE) method using ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) for the determination of moroxydine residues in pig and chicken samples has been developed. After extraction and purification of real samples, moroxydine residues were detected using a hydrophobic interaction liquid chromatography column with an optimised mobile phase composition. The extraction reagents, the kind of SPE columns and the type of eluents were optimised to achieve the maximum extraction efficiency. The matrix effects from the animal tissue influenced the quality of the quantitative data obtained. Under the optimised conditions, the moroxydine residues in pig and chicken samples spiked at three levels (1.0 μg/kg, 5.0 μg/kg and 10.0 μg/kg) were determined with good recoveries (61.5%-105.4%) and adequate relative standard deviations (3.2%-13.0%). In pig and chicken samples, the limit of detection (LOD) was 0.3 μg/kg, and the limit of quantification (LOQ) was 1.0 μg/kg. A sufficiently linear relationship in the range of 1.0 μg/kg-20.0 μg/kg was achieved with a good correlation coefficient (R ≥ 0.99).

No abstract