Biomaterial-associated microbial infection and thrombosis represent major issues to the success of long-term use of implantable blood-contacting medical devices. The development of new poly[bis(octafluoropentoxy) phosphazene (OFP) biomaterials provides new routes for combatting microbial infection and thrombosis. However, the limited mechanical properties of OFP to date render them unsuitable for application in medical devices and inhibit any attempts at subsequent surface topography modification. In this study, we synthesized cross-linkable OFPs (X-OFPs) with the different degrees of cross-linking in an effort to improve the mechanical properties. The results showed that the surface chemistry and surface topography of X-OFPs do not change significantly, but the surface mechanical stiffness increased after crosslinking. Atomic force microscopic phase images showed that the polymer phase separation structures changed due to cross-linking. Experiments with three bacterial strains: Staphylococcal epidermidis, Staphylococcal aureus, and Pseudomonas aeruginosa showed that bacterial adhesion was significantly decreased on the OFP and X-OFPs for both the pre-cross-linked and cross-linked as compared to polyurethane biomaterials. Furthermore, bacterial adhesions were lower on X-OFP surfaces than on precross-linked materials, suggesting that mechanical stiffness is an important parameter influencing bacterial adhesion. Blood plasma coagulation responses revealed longer coagulation times for OFP and X-OFP materials than on polyurethanes, indicating that the new cross-linked OFPs are resistant to plasma coagulation compared to currently used polyurethane biomaterials.

The utilization of biomaterials in implanted blood-contacting medical devices often induces a persistent problem of microbial infection, which results from bacterial adhesion and biofilm formation on the surface of biomaterials. In this research, we developed new fluorinated alkoxyphosphazene materials, specifically poly[bis(octafluoropentoxy) phosphazene] (OFP) and crosslinkable OFP (X–OFP), with improved mechanical properties, and further modified the surface topography with ordered pillars to improve the antibacterial properties. Three X–OFP materials, X–OFP 3.3 , X–OFP 8.1, X–OFP 13.6 , with different crosslinking densities were synthesized, and textured films with patterns of 500/500/600 nm (diameter/spacing/height) were fabricated via a two stage soft lithography molding process. Experiments with 3 bacterial strains: Staphylococcal epidermidis, Staphylococcal aureus , and Pseudomonas aeruginosa showed that bacterial adhesion coefficients were significantly lower on OFP and X–OFP smooth surfaces than on the polyurethane biomaterial, and surface texturing further reduced bacterial adhesion due to the reduction in accessible surface contact area. Furthermore the anti-bacterial adhesion effect shows a positive relationship with the crosslinking degree. Biofilm formation on the substrates was examined using a CDC biofilm reactor for 7 days and no biofilm formation was observed on textured X–OFP biomaterials. The results suggested that the combination of fluorocarbon chemistry and submicron topography modification in textured X–OFP materials may provide a practical approach to improve the biocompatibility of current biomaterials with significant reduction in risk of pathogenic infection.