No abstract

A novel α-FeOOH/mesoporous carbon (α-FeOOH/MesoC) composite prepared by in situ crystallization of adsorbed ferric ions within carboxyl functionalized mesoporous carbon was developed as a novel visible light assisted heterogeneous Fenton-like catalyst. The visible light active α-FeOOH nanocrystals were encapsulated in the mesoporous frameworks accompanying with surface attached large α-FeOOH microcrystals via C-O-Fe bonding. Assisting with visible light irradiation on α-FeOOH/MesoC, the mineralization efficiency increased owing to the photocatalytic promoted catalyzing HO beyond the photothermal effect. The synergistic effect between α-FeOOH and MesoC in α-FeOOH/MesoC composite improved the mineralization efficiency than the mixture catalyst of α-FeOOH and MesoC. The iron leaching is greatly suppressed on the α-FeOOH/MesoC composite. Interestingly, the reused α-FeOOH/MesoC composites showed much higher phenol oxidation and mineralization efficiencies than the fresh catalyst and homogeneous Fenton system (FeSO/HO). The XPS, XRD, FTIR, and textural property results reveal that the great enhancement comes from the interfacial emerged oxygen containing groups between α-FeOOH and MesoC after the first heterogeneous Fenton-like reaction. In summary, visible light induced photocatalysis assisted heterogeneous Fenton-like process in the α-FeOOH/MesoC composite system improved the HO• production efficiency and Fe(III)/Fe(II) cycle and further activated the interfacial catalytic sites, which finally realize an extraordinary higher degradation and mineralization efficiency.

Hard carbon (HC) is a promising anode material for sodium‐ion batteries, yet still suffers from low initial Coulombic efficiency (ICE) and unstable solid electrolyte interphase (SEI). Herein, sodium diphenyl ketone (Na‐DK) is applied to realize dual‐function presodiation for HC anodes. It compensates the irreversible Na uptake at the oxygen‐containing functional groups and reacts with carbon defects of five/seven‐membered rings for quasi‐metallic sodium in HC. The as‐formed sodium induces robust NaF‐rich SEI on HC in 1.0 M NaPF6 in diglyme, favoring the interfacial reaction kinetics and stable Na+ insertion and extraction. This renders the presodiated HC (pHC) with high ICE of ≈100 % and capacity retention of 82.4 % after 6800 cycles. It is demonstrated to couple with Na3V2(PO4)3 cathodes in full cells to show high capacity retention of ≈100 % after 700 cycles. This work provides in‐depth understanding of chemical presodiation and a new strategy for highly stable sodium‐ion batteries.

A durable bulk superhydrophobic film based on silicone rubber/silica was prepared by UV curing followed by solvent evaporation.

Two-phase transformation reaction is ubiquitous in solid-state electrochemistry; however, it usually involves inferior structure rearrangement upon extraction and insertion of large-sized Na + , thus leading to severe local strain, cracks, and capacity decay in sodium-ion batteries (SIBs). Here, a homeostatic solid solution reaction is reported in the layered cathode material P′2-Na 0.653 Ni 0.081 Mn 0.799 Ti 0.120 O 2 during sodiation and desodiation. It is induced by the synergistic incorporation of Ni and Ti for the reinforced O(2p)-Mn(3d-e g *) hybridization, which leads to mitigated Jahn−Teller distortion of MnO 6 octahedra, contracted transition-metal oxide slabs, and enlarged Na layer spacings. The thermodynamically favorable solid solution pathway rewards the SIBs with excellent cycling stability (87.2% capacity retention after 500 cycles) and rate performance (100.5 mA h g −1 at 2500 mA g −1 ). The demonstrated reaction pathway will open a new avenue for rational designing of cathode materials for SIBs and beyond.