No abstract

The performance of distributed optical fiber acoustic sensor as a function of parameters such as the linewidth of the laser, the probe pulse width, and the amplitude and frequency of perturbation is experimentally studied. The aim of this study is to experimentally confirm the outcome of the simulation results obtained previously. It is shown that the experimental and simulation results are in good agreement, and the precision of the sensing system depends on the pulse width and linewidth of the probe pulse, as well as the frequency and amplitude of the perturbation. It is shown that the sensing precision of the system can be enhanced by reducing the width of the probe pulse while increasing the linewidth of the laser. Published by The Optical Society under the terms of the Creative Commons Attribution 4.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.

A sensitivity enhanced temperature sensor with cascaded tapered two-mode fibers (TTMFs) based on the Vernier effect is proposed and experimentally demonstrated. It is confirmed that series connection exhibits higher extinction ratio than parallel one both by theory and experiments, which provides guidance for related experiments. In experiments, two TTMFs have the same single-mode fiber-TTMF-single-mode fiber configuration, while the free spectral ranges (FSRs) are chosen with slightly difference by modifying the parameters in the tapering process. Experimental results show that the proposed temperature sensor possesses sensitivity of −3.348 nm/°C in temperature measurement range from 25 °C to 60°C, 11.3 times sensitivity enhancement in comparison with single TTMF. Benefiting from advantages of high temperature sensitivity, simplicity of manufacture and long distance sensing, this novel sensitivity enhanced temperature sensor can be applied to various particular fields, such as oil wells, coal mines and so on.

The influence of nonlinear phase modulations on third harmonic conversion in silica microfibers is experimentally demonstrated. By utilizing such influence, enhanced narrow-bandwidth UV is generated at high signal-to-noise ratio (33 dB) and an average power of several hundred nanowatts. Detailed trends of third harmonic power against input pump power were characterized with peak pump power up to 2.5 kW, and the results agree with predicted features, confirming that harmonic output could be optimized with adaptive control of phase mismatch.