No abstract

The physical and mechanical properties of grouting materials greatly affect the friction resistance and the bearing performance of a non-soil-squeezing PHC pipe pile. Orthogonal tests for four factors at five levels were carried out to optimize the proportion of the water–cement mixture by using Portland cement as a raw material and a water-reducing agent, expansion agent and early-strength agent as additives. The following conclusions were obtained: (1) Both the water–cement ratio and the dosage of water-reducing agent are positively correlated with the fluidity of the water–cement mixture and have the greatest influence on the fluidity, followed by the expansion agent and early-strength agent. The saturation point of the water-reducing agent is 1.5%. (2) The strength of the grouting body decreases linearly with the increase of the water–cement ratio, and the dosage of the water-reducing agent has no obvious effect on the strength. As the dosage of expansion agent increases, the strength of the grouting body decreases rapidly. The expansion agent mainly plays a key role in the middle and late stages of the hardening process of the slurry. Early-strength agents have a greater impact on the early strength, but less on the later strength. When the slurry is solidified for 3 h, the early-strength agent has the greatest impact on the strength with an optimal dosage of 5%. (3) The volume of the grouting body has an inverse relationship with the water–cement ratio, and the optimal amount of expansion agent is 12%. The incorporation of an expansion agent makes the volume increase of the grouting body exceed the volume shrinkage ratio caused by the hardening of the grouting body with a curing time of more than 3 days, ensuring a slight increase in the volume of the grouting body. After 3 days, even though the effect of the expansion agent is gradually weakened, it can still ensure that the volume of the grouting body does not shrink. With the increase of the amount of water-reducing agent, the volume of the grouting body gradually decreases. When the amount of water-reducing agent exceeds 1.5%, the volume of the grouting body no longer decreases. (4) The early-strength agent has almost no effect on the volume of the grouting body. When the curing time is 3 h, the water–cement ratio has the greatest influence on the volume of the grouting body, followed by the water-reducing agent, and, finally, the expansion agent. After 3 h, the water–cement ratio still has the greatest influence, and the influence of the expansion agent gradually exceeds that of the water-reducing agent. The water-reducing agent mainly affects the volume of the grouting body in the water separation stage, and the expansion agent mainly plays a role in the middle and late stages of the slurry solidification. After optimized ratio analysis, the fluidity of the water–cement mixture can be improved, the volume shrinkage ratio rate can be lowered and the early strength can be increased.

No abstract

No abstract

Pile foundation has unique advantage in reducing the settlement of the upper structure and improving the foundation bearing capacity, while Drilling with PHC Pipe Cased Pile (DPC Pile) is a newly developed non-extruded soil PHC tubular pile which integrates drilling-pile sinking-dumping simultaneously to solve the pile sinking problem of large diameter (800 ∼ 1400mm) pipe pile. It solves the problem of pile sinking caused by large pile diameter or hard soil layer, breaks the situation that the pipe pile foundation can only be limited to small diameter and size, and broadens the applicable scope of engineering geology of pipe pile. It realizes the full rock-socketed of the pile tip (which can enter the middle and weak weathering stratum), improves the bearing capacity of single pile, and gives full play to the advantages of pipe pile material with higher strength. It has little damage to the pipe pile and little noise, being relatively environmentally friendly, as well as plays a major demonstration role in leading the new direction of the development of green, energy-saving and environmental protection pile foundation, conforming with the advanced development trend of upgrading traditional advantageous industries to high-tech manufacturing and construction technology with promising market.