A scanning microwave microscope (SMM) for spatially resolved capacitance measurements in the attofarad-to-femtofarad regime is presented. The system is based on the combination of an atomic force microscope (AFM) and a performance network analyzer (PNA). For the determination of absolute capacitance values from PNA reflection amplitudes, a calibration sample of conductive gold pads of various sizes on a SiO(2) staircase structure was used. The thickness of the dielectric SiO(2) staircase ranged from 10 to 200 nm. The quantitative capacitance values determined from the PNA reflection amplitude were compared to control measurements using an external capacitance bridge. Depending on the area of the gold top electrode and the SiO(2) step height, the corresponding capacitance values, as measured with the SMM, ranged from 0.1 to 22 fF at a noise level of ~2 aF and a relative accuracy of 20%. The sample capacitance could be modeled to a good degree as idealized parallel plates with the SiO(2) dielectric sandwiched in between. The cantilever/sample stray capacitance was measured by lifting the tip away from the surface. By bringing the AFM tip into direct contact with the SiO(2) staircase structure, the electrical footprint of the tip was determined, resulting in an effective tip radius of ~60 nm and a tip-sample capacitance of ~20 aF at the smallest dielectric thickness.

The combination of fluorescence microscopy and atomic force microscopy has a great potential in single-molecule-detection applications, overcoming many of the limitations coming from each individual technique. Here we present a new platform of combined fluorescence and simultaneous topography and recognition imaging (TREC) for improved localization of cellular receptors. Green fluorescent protein (GFP) labeled human sodium-glucose cotransporter (hSGLT1) expressed Chinese Hamster Ovary (CHO) cells and endothelial cells (MyEnd) from mouse myocardium stained with phalloidin-rhodamine were used as cell systems to study AFM topography and fluorescence microscopy on the same surface area. Topographical AFM images revealed membrane features such as lamellipodia, cytoskeleton fibers, F-actin filaments and small globular structures with heights ranging from 20 to 30 nm. Combined fluorescence and TREC imaging was applied to detect density, distribution and localization of YFP-labeled CD1d molecules on alpha-galactosylceramide (alphaGalCer)-loaded THP1 cells. While the expression level, distribution and localization of CD1d molecules on THP1 cells were detected with fluorescence microscopy, the nanoscale distribution of binding sites was investigated with molecular recognition imaging by using a chemically modified AFM tip. Using TREC on the inverted light microscope, the recognition sites of cell receptors were detected in recognition images with domain sizes ranging from approximately 25 to approximately 160 nm, with the smaller domains corresponding to a single CD1d molecule.

SUMMARYThis paper proposes a complete satellite access network solution for multimedia broadcast multicast service (MBMS) delivery based on T-UMTS standards. First, the benefits of MBMS delivery via satellite (SAT-MBMS) for both S/T-UMTS network operators are shown with market and business analysis. A new integrated S/T-UMTS architecture for MBMS delivery is proposed featuring an intermediate module repeater (IMR) for coverage of urban areas. The architectural options of IMR and terminals are discussed considering the relevant cost and complexity. The IMR propagation channel conditions are investigated and a new propagation channel model is proposed. The potential of advanced coding schemes such as the layered coding technique to tackle the channel variations in broadcast/multicast environment is outlined. The functional and protocol architecture are defined along with the interface between the satellite access network and the UMTS core network. Required modifications on the terrestrial access scheme sub-layers to support MBMS data are investigated and the relevant logical, transport and physical channels are selected. Based on the channel selection and the point-to-multipoint service nature, we define a generic radio resource management (RRM) strategy that takes into account both QoS and GoS requirements. The efficiency of the proposed solutions is evaluated in the presented simulation results, advocating the feasibility of the overall approach.

No abstract

No abstract