We report a new strategy for on-line monitoring of chemical reactions in ultrasonically levitated, nanoliter-sized droplets by Raman spectroscopy. A flow-through microdispenser connected to an automated flow injection system was used to dose picoliter droplets into the node of an ultrasonic trap. Taking advantage of the flow-through characteristics of the microdispenser and the versatility of the automated flow system, a well-defined sequence of reagents could be injected via the microdispenser into the levitated droplet placed in the focus of the collection optics of the Fourier transform Raman spectrometer. In that way, chemical reactions could be carried out and monitored on-line. The developed system was used for fast, reproducible, in situ synthesis of a highly active surface enhanced Raman scattering (SERS) sol resulting from the reduction of silver nitrate with hydroxylamine hydrochloride in basic conditions. With this chemical system, SERS substrate preparation could be achieved at room temperature and in short time. The in situ prepared silver sol was used for trace analysis of several organic test molecules that were injected into the levitated SERS-active droplet again using the microdispenser. The concentration dependence of the SERS spectra was studied using 9-aminoacridine, revealing that down to the femtogram region high-quality SERS spectra could be obtained. Additionally, SERS spectra of 6-mercaptopurine, thiamine, and acridine were recorded in the levitated drop as well.
A new concept for the study of chemical reactions in solution by time-resolved Fourier transform infrared spectroscopy (TR/FT-IR) is presented. The key element of this concept is a micromachined mixing unit for fast and highly reproducible diffusion-based mixing that is incorporated in a flow cell for transmission measurements and operated in the stopped-flow mode. The mixing unit achieves multilamination of two liquid streamlines inside the flow cell. When the flow in both feeding channels is maintained, there is almost no mixing of the liquids, because of the short residence time inside the mixer, hence allowing for the recording of a reference spectrum of the reactants prior to reaction. When the flow is stopped by rapid switching of a dedicated injection valve, highly reproducible diffusion-controlled mixing takes place inside the flow cell so that spectral changes induced by the reaction under investigation can be directly followed. The total volume required for one experiment is ∼ 5 μL, and mixing times achieved so far are in the millisecond range. Factors governing time resolution in this new concept are the time required to stop the flow, the spacing of the individual streamlines, the diffusion coefficients of the reactants involved, and the signal strength of the spectral changes induced by the reaction under study. In this paper, the possibilities and limitations of the new concept are studied with the use of three model reactions, which are an acid-base neutralization reaction, the addition of sulfite to formaldehyde, and the basic hydrolysis of methyl monochloroacetate. In addition, the complete mixing process in the system was studied by computational fluid dynamics (CFD) simulations, which provided valuable insights into details of the mixing process itself as well as confirming the experimental results obtained.
Obidoxime appeared safe and reactivated AChE in parathion poisoning.
A method for the direct determination of carbon dioxide in aqueous solutions using a room-temperature mid-infrared (MIR) quantum cascade laser at 2330 cm(-1) is reported. The absorption values of different carbon dioxide concentrations were measured in a 119 microm CaF2 flow-through cell. An optical system made of parabolic mirrors was used to probe the flow cell and to focus the laser beam on the mercury cadmium telluride (MCT) detector. Aqueous carbon dioxide standards were prepared by feeding different mixtures of gaseous N2 and CO2 through wash bottles at controlled temperature. The concentration of the dissolved CO2 was calculated according to Henry's law, taking into account the temperature and the partial pressure of CO2. The carbon dioxide standards were connected via a selection valve to a peristaltic pump for subsequent, automated measurement in the flow-through cell. A calibration curve was obtained in the range of 0.338 to 1.350 g/L CO2 with a standard deviation of the method sxo equal to 19.4 mg/L CO2. The limit of detection was calculated as three times the baseline noise over time and was determined to be 39 mg/L.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.