No abstract

No abstract

Dielectric elastomers are used as base material for so-called electroactive polymer (EAP) actuators. A procedure and a specific constitutive model (for the acrylic elastomer VHB 4910) are presented in this work for finite element modeling and simulation of dielectric elastomer actuators of general shape and set-up. The Yeoh strain energy potential and the Prony series are used for describing the large strain time-dependent mechanical response of the dielectric elastomer. Material parameters were determined from uniaxial experiments (relaxation tests and tensile tests). Thereby the inverse problem was solved using iterative finite element calculations. A pre-strained circular actuator was built and activated with a predefined voltage. A three-dimensional finite element model of the circular actuator was created and the electromechanical activation process simulated. Simulation and actual measurements agree to a great extent, thus leading to a validation of both the constitutive model and the actuator simulation procedure proposed in this work.