No abstract

For the regeneration or creation of functional tissues, biodegradable biomaterials including polylactic acid (PLA) are widely preferred. Modifications of the material surface are quite common to improve cell−material interactions and thereby support the biological outcome. Typical approaches include a wet chemical treatment with mostly hazardous substances or a functionalization with plasma. In the present study, gas-phase fluorination was applied to functionalize the PLA surfaces in a simple and one-step process. The biological response including biocompatibility, cell adhesion, cell spreading, and proliferation was analyzed in cell culture experiments with fibroblasts L929 and correlated with changes in the surface properties. Surface characterization methods including surface energy and isoelectric point measurements, X-ray photoelectron spectroscopy, and atomic force microscopy were applied to identify the effects of fluorination on PLA. Gas-phase fluorination causes the formation of C−F bonds in the PLA backbone, which induce a shift to a more hydrophilic and polar surface. The slightly negatively charged surface dramatically improves cell adhesion and spreading of cells on the PLA even with low fluorine content. The results indicate that this improved biological response is protein-but not integrin-dependent. Gas-phase fluorination is therefore an efficient technique to improve cellular response to biomaterial surfaces without losing cytocompatibility.

No abstract

In the present study, the tannins from stem and root barks of Tessmannia burttii Harms (Caesalpiniaceae), a plant species abundantly growing in Tanzania and other parts of Africa, were investigated for their suitability in hides tanning. Tannin powder was extracted at selected temperatures (30, 50 and 80 °C) and the influence of each temperature on the crosslinking capacity was evaluated. The interaction mechanism between hide powder collagen and the tannins was studied by Differential Scanning Calorimetry (DSC), trinitrobenzensulfonic (TNBS) acid assay and amino acid hydrolysis methods. Extraction temperatures showed low influence on crosslinking capacity of the tannins. However, extract obtained at 50 °C exhibited best performance in terms of gap size between Tonset and Tpeak. The stem bark extract yield was higher than that from the root bark, but both were within the recommended ranges. The tannin content (61%) of T. burttii stem bark extract was above recommended value (10%), whereas its total phenolic content and total flavonoic content were found to be above that of commercial Acacia mearnsii tannin. The study of cross-linking parameters as a function of pH showed cross-linking to occur via a covalent mechanism at the basic amino groups. However, the bonds were not resistant to acid hydrolysis. The observed interaction mechanism indicated that tannins from stem and root barks of T. burttii belong to the condensed tannin, similar to A. mearnsii (black wattle), a commercial tannin source that was used in this study as a reference. Findings from this study depict that T. burttii extracts are auspicious eco-friendly alternative source of vegetable tannins to overcome the use of chromium salts in the leather industry. Graphical abstract