This paper describes the damage survey in the city of L'Aquila after the 6 April 2009 earthquake. The earthquake, whose magnitude and intensity reached Mw = 6.3 and Imax = 9-10 MCS, struck the Abruzzi region of Central Italy producing severe damage in L'Aquila and in many villages along the Middle Aterno River valley. After the event, a building-to-building survey was performed in L'Aquila downtown aiming to collect data in order to perform a strict evaluation of the damage. The survey was carried out under the European Macroseismic Scale (EMS98) to evaluate the local macroseismic intensity. This damage survey represents the most complex application of the EMS98 in Italy since it became effective. More than 1,700 buildings (99% of the building stock) were taken into account during the survey at L'Aquila downtown, highlighting the difficult application of the macroseismic scale in a large urban context. The EMS98 revealed itself to be the best tool to perform such kind of analysis in urban settings. The complete survey displayed evidence of peculiar features in the damage distribution. Results revealed that the highest rate of collapses occurred within a delimited area of the historical centre and along the SW border of the fluvial terrace on which the city is settled. Intensity assessed for L'Aquila downtown was 8-9 EMS.

<p>On May 20, 2012, at 4:03 local time (2:03 UTC), a large part of the Po Valley between the cities of Ferrara, Modena and Mantova was struck by a damaging earthquake (Ml 5.9). The epicenter was located by the Istituto Nazionale di Geo-fisica e Vulcanologia (INGV) seismic network [ISIDe 2010] at 44.889 ˚N and 11.228 ˚E, approximately 30 km west of Ferrara (Figure 1). The event was preceded by a foreshock that occurred at 01:13 local time, with a magnitude of Ml 4. The mainshock started an intense seismic sequence that lasted for weeks, counting more than 2,000 events, six of which had Ml &gt;5. The strongest earthquakes of this sequence occurred on May 29, 2012, with Ml 5.8 and Ml 5.3, recorded at 9:00 and 12:55 local time, respectively. The epicenters of the May 29, 2012, events were located at the westernmost part of the rupture zone of the May 20, 2012, earthquake (Figure 2). The May 20 and 29, 2012, earthquakes were felt through the whole of northern and central Italy, and as far as Switzerland, Slovenia, Croatia, Austria, south-eastern France and southern Germany. Historical information reveals that the seismic activity in the Po Valley is moderate […]</p>

<p>The central Italy seismic sequence, started with the Mw = 6.0 Amatrice earthquake on August 24th 2016, is the first significant one after the Italian Seismic Bulletin (BSI) changed its analysis strategies in 2015. These new strategies consist on the release of the BSI every four months, the review of the events with ML ≥ 1.5 and the priority on the review of events with ML ≥ 3.5. Furthermore, in the last year we improved the bulletin tools and made possible the analysis of all the stations whose data are stored in the European Integrated Data Archive (EIDA). The new procedures and software utilities allowed, during the first month of 2016 emergency, to integrate, in the Bulletin, the temporary stations installed by the emergency group SISMIKO, both in real–time transmission and in stand-alone recording. In the early days of the sequence many of the BSI analysts were engaged in the monitoring room shifts, nevertheless at the end of August all events occurred in those days with ML ≥ 4 were analyzed; the largest event recovered and localized is a ML = 4.5 event immediately following the main shock. In September 2016, 83 events with ML ≥ 3.5 were analyzed and re-checked, the number of pickings greatly improved. The focal mechanism of the main shock was evaluated using first motion polarities, and compared with the available Time Domain Moment Tensors and Regional Centroid Moment Tensor. The first eight hours of the day on August 24th, the most critical for the INGV surveillance room, were carefully analyzed: the number of located events increased from 133 to 408. The magnitude of completeness, after the analysis of the BSI, has dropped significantly from about 3.5 to 2.7. The mainshock focal mechanism and the relative locations of the first 8 hours’ aftershocks give clues on the initial fault activation. The seismic sequence in November 2016 is still ongoing; it included a mainshock of Mw = 6.5 on October 30th and 3 events of magnitude greater than 5.0 one on August 24th and two on October 26th.</p>

<p>The 24 August 2016 earthquake very heavily struck the central sector of the Apennines among the Lazio,Umbria, Marche and Abruzzi regions, devastating the town of Amatrice, the nearby villages and other localities along the Tronto valley. In this paper we present the results of the macroseismic field survey carried out using the European Macroseismic Scale (EMS) to take the heterogeneity of the building stock into account. We focused on the epicentral area, where geological conditions may also have contributed to the severity of damage. On the whole, we investigated 143 localities; the maximum intensity 10 EMS has been estimated for Amatrice, Pescara del Tronto and some villages in between. The severely damaged area (8-9 EMS) covers a strip trending broadly N-S and extending 15 km in length and 5 km in width; minor damage occurred over an area up to 35 km northward from the epicenter.</p>

No abstract