This paper presents a differential synthetic aperture radar (SAR) interferometry (DIFSAR) approach for investigating deformation phenomena on full-resolution DIFSAR interferograms. In particular, our algorithm extends the capability of the small-baseline subset (SBAS) technique that relies on small-baseline DIFSAR interferograms only and is mainly focused on investigating large-scale deformations with spatial resolutions of about 100 x 100 m. The proposed technique is implemented by using two different sets of data generated at low (multilook data) and full (single-look data) spatial resolution, respectively. The former is used to identify and estimate, via the conventional SBAS technique, large spatial scale deformation patterns, topographic errors in the available digital elevation model, and possible atmospheric phase artifacts; the latter allows us to detect, on the full-resolution residual phase components, structures highly coherent over time (buildings, rocks, lava, structures, etc.), as well as their height and displacements. In particular, the estimation of the temporal evolution of these local deformations is easily implemented by applying the singular value decomposition technique. The proposed algorithm has been tested with data acquired by the European Remote Sensing satellites relative to the Campania area (Italy) and validated by using geodetic measurements. RI Sansosti, Eugenio/F-7297-201

We investigate a large geodetic data set of interferometric synthetic aperture radar (InSAR) and GPS measurements to determine the source parameters for the three main shocks of the 2016 Central Italy earthquake sequence on 24 August and 26 and 30 October (Mw 6.1, 5.9, and 6.5, respectively). Our preferred model is consistent with the activation of four main coseismic asperities belonging to the SW dipping normal fault system associated with the Mount Gorzano‐Mount Vettore‐Mount Bove alignment. Additional slip, equivalent to a Mw ~ 6.1–6.2 earthquake, on a secondary (1) NE dipping antithetic fault and/or (2) on a WNW dipping low‐angle fault in the hanging wall of the main system is required to better reproduce the complex deformation pattern associated with the greatest seismic event (the Mw 6.5 earthquake). The recognition of ancillary faults involved in the sequence suggests a complex interaction in the activated crustal volume between the main normal faults and the secondary structures and a partitioning of strain release.

Accurate subpixel registration of synthetic aperture radar (SAR) images is an issue that is again growing interest since its initial developments related to two-pass interferometry. Recent progress in coherent (multichannel) SAR processing raises the need for accurate registration of data takes acquired with large baseline spans, high temporal coverage, and with different frequency and/or operational modes. In this paper, we discuss a SAR image-registration procedure, based on the use of external measures which allows obtaining a very accurate alignment of SAR images. The presented technique makes use of a digital elevation model and of the precise information about the acquisition flight tracks, to compute the warping functions that map the position of each pixel in the different takes, thus avoiding any approximation. The resulting algorithm is simple, robust, precise, and very efficient; as a matter of fact, it may achieve high accuracy even in critical areas, such as steep topography regions. Moreover, the availability of an analytical and exact model allows performing a detailed sensitivity analysis that can be useful in evaluating the applicability of this technique even to future high-precision satellite systems. Extensive testing, carried out on several real European Remote Sensing and ENVISAT datasets, clearly shows the effectiveness of such algorithm in registering critical SAR images. RI Sansosti, Eugenio/F-7297-201

We investigate the ground deformation and source geometry of the 2016 Amatrice earthquake (Central Italy) by exploiting ALOS2 and Sentinel‐1 coseismic differential interferometric synthetic aperture radar (DInSAR) measurements. They reveal two NNW‐SSE striking surface deformation lobes, which could be the effect of two distinct faults or the rupture propagation of a single fault. We examine both cases through a single and a double dislocation planar source. Subsequently, we extend our analysis by applying a 3‐D finite elements approach jointly exploiting DInSAR measurements and an independent, structurally constrained, 3‐D fault model. This model is based on a double fault system including the two northern Gorzano and Redentore‐Vettoretto faults (NGF and RVF) which merge into a single WSW dipping fault surface at the hypocentral depth (8 km). The retrieved best fit coseismic surface deformation pattern well supports the exploited structural model. The maximum displacements occur at 5–7 km depth, reaching 90 cm on the RVF footwall and 80 cm on the NGF hanging wall. The von Mises stress field confirms the retrieved seismogenic scenario.