The swelling behavior of poly(acrylic acid‐co‐itaconic acid)/NaOH hydrogel as well as its ability for iron and copper rust removal was studied and established for the first time. Through an experimental design, the influence of the synthesis parameters on hydrogel response was determined. It was found that pH‐responsiveness dependence of hydrogel determines its application. In alkaline media, the hydrogel acted as superabsorbent, while in acidic, the most outstanding property was its pickling capability that allowed to clean carbon steel and copper metallic surfaces. Infrared, thermogravimetry, and scanning electron microscopy were performed to determine copolymer formation, thermal properties, and morphology. Metallic crystallographic phases formed during the corrosion processes were determined by X‐ray diffractometer. Hydrogel adhesiveness followed by diffusion and dissolution of metal oxides species was identified as the main steps in the rust removal mechanism. This method offers a new, environmentally friendly perspective to eliminate corrosion from metallic surfaces compared with traditional strategies. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48403.

A poly(acrylic acid-co-itaconic acid) (PAA-co-IA)/NaOH hydrogel containing bamboo-type multiwall carbon nanotubes (B-MWCNTs) doped with nitrogen (PAA-co-IA/NaOH/B-MWCNTs) was synthesized and characterized by SEM, absorption of water, point of zero charges, infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. The possible use of the PAA-co-IA/NaOH/B-MWCNT hydrogel as an electrode modifier and pre-concentrator agent for Cd(II) sensing purposes was then evaluated using carbon paste electrodes via differential pulse voltammetry. The presence of the B-MWCNTs in the hydrogel matrix decreased its degree of swelling, stabilized the structure of the swollen gel, and favored the detection of 3 ppb Cd(II), which is comparable to the World Health Organization’s allowable maximum value in drinking water. A calibration curve was obtained in the concentration range of 2.67 × 10−8 to 6.23 × 10−7 M (i.e., 3 and 70 ppb) to determine a limit of detection (LOD) of 19.24 μgL−1 and a sensitivity of 0.15 μC ppb−1. Also, the Zn(II), Hg(II), Pb(II) and Cu(II) ions interfered moderately on the determination of Cd(II).

No abstract

No abstract

No abstract