Energy storage is one of the highest priority challenges in transitioning to a low-carbon economy.Fluctuating, intermittent primary renewable sources such as wind and solar require low-carbon storage options to enable effective load matching, ensuring security of supply. Chemical storage is one such option, with low or zero carbon fuels such as hydrogen, alcohols and ammonia having been proposed.Ammonia provides zero-carbon hydrogen storage whilst offering liquefaction at relatively low pressures and atmospheric temperatures, enabling ease of transportation in a pre-existing infrastructure. Ammonia can also be used directly as a fuel in power plants such as gas turbines to avoid complete conversion back to hydrogen. It is a relatively unreactive fuel, and so it is of interest to explore the potential utilisation of ammonia/hydrogen mixtures. Hence, the goal of this paper is to provide a first assessment of the suitability of a chosen 70%NH3-30%H2 (%vol) blend for utilisation within a gas turbine environment, based on primary combustion diagnostics including combustion stabilityvia OH chemiluminescence -and emissions (NOx and NH3). An established optical generic swirl-burner enabled studies of the influence of equivalence ratio (φ >1), ambient temperature (<484±10 K) and bypass air, with a focus on NOx reduction, one of the main challenges for ammonia combustion. A numerical GT cycle model is developed alongside the experimental investigation. The results demonstrate that the blend has considerable potential as a fuel substitute with reasonable combustion stability and significant reduction of emissions for the cases without bypass air, due to increased chemical reactivity of unburned ammonia. However, emissions are still above those recommended for gas turbine cycles, with a theoretical cycle that still produces low efficiencies compared to DLN methane, highlighting the requirement for new injection techniques to reduce NOx/unburned NH3 in the flue gases whilst ensuring increased power outputs.

No abstract

This paper presents the performance and economic analysis of the gas turbine with co-firing gas from corn cob gasification and natural gas. Adiabatic and non-adiabatic expansion in the turbine is considered. The analysis is performed parametrically with corn cob gasification gas and natural gas ratio. The volumetric energy content of fuels with different share of gas from the corn cob gasification therefore, with different calorific values, is compared by means of the Wobbe Index. In energy and economic analyses, the following configurations are dealt with: single manifold, dual manifold and separate gas systems. [Projekat Ministarstva nauke Republike Srbije, br. 33049: The Development of CHP Demonstration Plant with Biomass Gasification]

No abstract

This paper presents a new approach in mathematical modeling of thermodynamic cycles and electric power of utility district-heating and cogeneration steam turbines. The approach is based on the application of the dimensionless mass flows, which describe the thermodynamic cycle of a combined heat and power steam turbine. The mass flows are calculated relative to the mass flow to low pressure turbine. The procedure introduces the extraction mass flow load parameter νh which clearly indicates the energy transformation process, as well as the cogeneration turbine design features, but also its fitness for the electrical energy system requirements. The presented approach allows fast computations, as well as direct calculation of the selected energy efficiency indicators. The approach is exemplified with the calculation results of the district heat power to electric power ratio, as well as the cycle efficiency, versus νh. The influence of νh on the conformity of a combined heat and power turbine to the grid requirements is also analyzed and discussed. [Projekat Ministarstva nauke Republike Srbije, br. 33049: Development of CHP demonstration plant with gasification of biomass