Introduction. To attain high efficiency and reliability in the field of clean energy conversion, power electronics play a significant role in a wide range of applications. More effort is being made to increase the dependability of power electronics systems. Purpose. In order to avoid any undesirable effects or disturbances that negatively affect the continuity of service in the field of energy production, this research provides a fault detection technique for insulated-gate bipolar transistor open-circuit faults in a three-level diode-clamped inverter of a wind energy conversion system predicated on a doubly-fed induction generator. The novelty of the suggested work ensures the regulation of power exchanged between the system and the grid without faults, advanced intelligence approaches based on a multilayer artificial neural network are used to discover and locate this type of defect; the database is based on the module and phase angle of three-phase stator currents of induction generators. The proposed methods are designed for the detection of one or two open-circuit faults in the power switches of the side converter of a doubly-fed induction generator in a wind energy conversion system. Methods. In the proposed detection method, only the three-phase stator current module and phase angle are used to identify the faulty switch. The primary goal of this fault diagnosis system is to effectively detect and locate failures in one or even more neutral point clamped inverter switches. Practical value. The performance of the controllers is evaluated under different operating conditions of the power system, and the reliability, feasibility, and effectiveness of the proposed fault detection have been verified under various open-switch fault conditions. The diagnostic approach is also robust to transient conditions posed by changes in load and speed. The proposed diagnostic technique's performance and effectiveness are both proven by simulation in the SimPower /Simulink® MATLAB environment.

No abstract

No abstract

Solar energy is one of the most promising renewable energy sources. The potential solar energy has a capacity to meet all energy requirements for human survival on planet earth. Some applications such as a thermoelectric generator, electric power generation with the assistance of solar panels and water applications are required to reduce the demand for electricity generated by conventional power plants. The current work evaluates the effectiveness of solar energy for supplying the police building located in Diyala, Iraq. The installed renewable power system consists of photovoltaic/ battery system set with grid connection installed on the roof of the building with a capacity of 5.52 kWp and battery unit (200 A, 48 Volt). Based on the daily average load kWh and daily average solar irradiance for the selected site (4.3 kWh/m2), the results of the energy generated by the system for two selected days showed that for a sunny day is about (11.63 kWh) and for party cloudy day is about (8.02 kWh). The average of energy fed to the grid for a sunny day was recorded more by more than 3.0 kWh and for party cloudy day by more than 4.0 kWh.  The system installed at the first day of February of the year 2021. The obtained results encourage to install of photovoltaic systems in the selected site which can feed such facilities with renewable energy and deliver energy to the grid.

In meeting customer needs while maintaining the stability of the power system, PT. PLN (Persero) conducted an acceleration program carried out on the generation system which was followed by upgrading of the main technical material (MTU) found in several substations both on 500 kV and 150 kV systems. One of the MTUs conducted by Uprating is a Circuit Breaker (CB) equipment 500 kV located in the New Balaraja Extra High Voltage Substation (GITET). The difference in manufacturer's brand is an obstacle to the Uprating process so that it needs to be done Wiring Modification. The test equipment performed is the quality of SF6 gas, insulation and contact resistance, CB opening and closing time, minimum coil voltage and capacitance testing that refers to applicable standards and then analyzed the results of tests with existing theories.