Despite recent remarkable advances in stretchable organic thin-film field-effect transistors (OTFTs), the development of stretchable metallization remains a challenge. Here, we report a highly stretchable and robust metallization on an elastomeric semiconductor film based on metal-elastic semiconductor intermixing. We found that vaporized silver (Ag) atom with higher diffusivity than other noble metals (Au and Cu) forms a continuous intermixing layer during thermal evaporation, enabling highly stretchable metallization. The Ag metallization maintains a high conductivity (>10 4 S/cm) even under 100% strain and successfully preserves its conductivity without delamination even after 10,000 stretching cycles at 100% strain and several adhesive tape tests. Moreover, a native silver oxide layer formed on the intermixed Ag clusters facilitates efficient hole injection into the elastomeric semiconductor, which transcends previously reported stretchable source and drain electrodes for OTFTs.

Intrinsically stretchable light-emitting materials are crucial for skin-like wearable displays; however, their color range has been limited to green-like yellow lights owing to the restricted stretchable light-emitting materials (super yellow series materials). To develop skin-like full-color displays, three intrinsically stretchable primary light-emitting materials [red, green, and blue (RGB)] are essential. In this study, we report three highly stretchable primary light-emitting films made from a polymer blend of conventional RGB light-emitting polymers and a nonpolar elastomer. The blend films consist of multidimensional nanodomains of light-emitting polymers that are interconnected in an elastomer matrix for efficient light-emitting under strain. The RGB blend films exhibited over 1000 cd/m 2 luminance with low turn-on voltage (<5 V on ) and the selectively stretched blend films on rigid substrate maintained stable light-emitting performance up to 100% strain even after 1000 multiple stretching cycles.