The aim of the presented investigation is to explore the time gap between an anomaly appearance in continuously measured parameters of the device and a failure, related to the end of the remaining resource of the device-critical component. In this investigation, we propose a recurrent neural network to model the time series of the parameters of the healthy device to detect anomalies by comparing the predicted values with the ones actually measured. An experimental investigation was performed on SCADA estimates received from different wind turbines with failures. A recurrent neural network was used to predict the temperature of the gearbox. The comparison of the predicted temperature values and the actual measured ones showed that anomalies in the gearbox temperature could be detected up to 37 days before the failure of the device-critical component. The performed investigation compared different models that can be used for temperature time-series modeling and the influence of selected input features on the performance of temperature anomaly detection.

The topology of the static synchronous compensator of reactive power for a low-voltage three-phase utility grid capable of asymmetric reactive power compensation in grid phases has been proposed and analysed. It is implemented using separate, independent cascaded H-bridge multilevel inverters for each phase. Every inverter includes two H-bridge cascades. The first cascade operating at grid frequency is implemented using thyristors, and the second one—operating at high frequency is based on the high-speed MOSFET transistors. The investigation shows that the proposed compensator is able to compensate the reactive power in a low-voltage three-phase grid when phases are loaded by highly asymmetrical reactive loads and provides up to three times lower power losses in the compensator as compared with the situation when the compensator is based on the conventional three-level inverters implemented using IGBT transistors.