There are vast reserves of foliage in nature, which is an inexhaustible precious resource. In this study, the chemical components of five foliage types (pine needles, black locust tree leaves, bamboo leaves, elm leaves and poplar leaves) were analyzed, including cellulose content, hemicellulose content, and lignin content. The bio-enzymatic method was then used to prepare cellulose nanoparticles (CNPs) from these five kinds of leaves, and the prepared CNPs were analyzed using TEM, FTIR, FESEM, and XRD. The results showed that the content of hemicellulose in bamboo leaves was the highest, and the lignin content in the other four leaves was the highest. The cellulose content in the five kinds of foliage was arranged from large to small as pine needles (20.5%), bamboo leaves (19.5%), black locust leaves (18.0%), elm leaves (17.6%), and poplar leaves (15.5%). TEM images showed that the CNPs prepared by the five kinds of foliage reached the nanometer level in width and the micrometer level in length; therefore, the CNPs prepared in this study belonged to cellulose nanofibers (CNFs). The results of FTIR and XRD showed that CNFs prepared by the enzyme treatment exhibited a typical crystalline structure of cellulose II. The degree of crystallinity (DOC) of CNFs prepared from pine needle, poplar leaves, and bamboo leaves are 78.46%, 77.39%, and 81.51%, respectively. FESEM results showed that the CNFs prepared from pine needles, poplar leaves and bamboo leaves by enzymatic method presents a three-dimensional (3D) network structure, and their widths are 31 nm, 36 nm, and 37 nm, respectively. This study provides a meaningful reference for broadening the use of foliage types and improving their added value.

Natural fiber/plastic composites combine the low density and excellent mechanical properties of the natural fiber with the flexibility and moisture resistance of the plastic to create materials tailored to specific applications in theory. Wood/plastic composites (WPC) are the most common products, but many other fibers are being explored for this purpose. Among the more common is hemp hurd. Natural fibers are hydrophilic materials and plastics are hydrophobic, therefore one problem with all of these products is the limited ability of the fiber to interact with the plastic to create a true composite. Thus, compatibilizers are often added to enhance interactions, but fiber pretreatments may also help improve compatibility. The effects of pectinase or cellulase pretreatment of wood/hemp fiber mixtures in combination with coupling agents were evaluated in polypropylene panels. Pretreatments with pectinase or cellulase were associated with reduced thickness swell (TS24h) as well as increased modulus of rupture and modulus of elasticity. Incorporation of 5.0% silane or 2.5% silane/2.5% titanate as a coupling agent further improved pectinase-treated panel properties, but was associated with diminished properties in cellulase treated fibers. Combinations of enzymatic pretreatment and coupling agents enhanced fiber/plastic interactions and improved flexural properties, but the effects varied with the enzyme or coupling agent employed. The results illustrate the potential for enhancing fiber/plastic interactions to produce improved composites.

No abstract