Lignin is a major component of lignocellulosic biomass and as such, it is processed in enormous amounts in the pulp and paper industry worldwide. In such industry it mainly serves the purpose of a fuel to provide process steam and electricity, and to a minor extent to provide low grade heat for external purposes. Also from other biorefinery concepts, including 2nd generation ethanol, increasing amounts of lignin will be generated. Other uses for lignin - apart from fuel production - are of increasing interest not least in these new biorefinery concepts. These new uses can broadly be divided into application of the polymer as such, native or modified, or the use of lignin as a feedstock for the production of chemicals. The present review focuses on the latter and in particular the advances in the biological routes for chemicals production from lignin. Such a biological route will likely involve an initial depolymerization, which is followed by biological conversion of the obtained smaller lignin fragments. The conversion can be either a short catalytic conversion into desired chemicals, or a longer metabolic conversion. In this review, we give a brief summary of sources of lignin, methods of depolymerization, biological pathways for conversion of the lignin monomers and the analytical tools necessary for characterizing and evaluating key lignin attributes.

The conversion of lignin to potentially high-value low molecular weight compounds often results in complex mixtures of monomeric and oligomeric compounds. In this study, a method for the quantitative and qualitative analysis of 40 lignin-derived compounds using ultra-high-performance supercritical fluid chromatography coupled to quadrupole-time-of-flight mass spectrometry (UHPSFC/QTOF-MS) has been developed. Seven different columns were explored for maximum selectivity. Makeup solvent composition and ion source settings were optimised using a D-optimal design of experiment (DoE). Differently processed lignin samples were analysed and used for the method validation. The new UHPSFC/QTOF-MS method showed good separation of the 40 compounds within only 6-min retention time, and out of these, 36 showed high ionisation efficiency in negative electrospray ionisation mode. Graphical abstractA rapid and selective method for the quantitative and qualitative analysis of 40 lignin-derived compounds using ultra-high-performance supercritical fluid chromatography coupled to quadrupole-time-of-flight mass spectrometry (UHPSFC/QTOF-MS) Electronic supplementary materialThe online version of this article (10.1007/s00216-017-0663-5) contains supplementary material, which is available to authorized users.

The profiles of carotenoids and production of β-carotene by six eustigmatophytes, Eustigmatos magnus, Eustigmatos polyphem, Eustigmatos vischeri, Vischeria helvetica, Vischeria punctata and Vischeria stellata, grown in a bubble column photobioreactor were measured. All eustigmatophytes contained β-carotene, violaxanthin and vaucheriaxanthin as their major carotenoids and accumulated large amount of β-carotene, which accounted for over 50 % of total carotenoids. Maximum intracellular β-carotene contents ranged 1.5-3.5 % of dry wt and in V. stellata it reached 5.9 % dry wt, accompanied by a biomass dry wt >7.3 g/l, with the highest up to 9.8 g/l. These eustigmatophytes are thus promising producers of β-carotene.

No abstract