The ultrathin nanocomposite coatings made of zirconium oxide (ZrO 2 ), zinc oxide (ZnO), and titanium oxide (TiO 2 ) on stainless steel (SS) were prepared by the radio frequency sputtering method, and the effects of the nanocomposite coating on corrosion protection and antibacterial activities of nanocomposite coated SS were investigated. Scanning electron microscopy was conducted to observe surface morphology of nanocomposite coatings with distinct distribution of grains with the formation on SS substrate. From the electrochemical impedance spectroscopy results, ZrO 2 /ZnO/TiO 2 nanocomposite coating showed excellent corrosion protection performance at 37 °C during immersion in simulated body fluid and saliva solution for 12 and 4 weeks, respectively. The impedance of ZrO 2 /ZnO/ TiO 2 (40/10/50) nanocomposite coated SS exhibited values about 5 orders of magnitude higher than that of uncoated SS with polarization at the low-frequency region. Cell viability of ZrO 2 /ZnO/TiO 2 nanocomposite coated SS was examined under mouse fibroblasts culture (L929), and it was observed that the nanocomposite coating improves proliferation through effective cellular attachment compared to uncoated SS. From the antimicrobial activity results, ZrO 2 /ZnO/TiO 2 nanocomposite-coated SS showed killing efficiency of 81.2% and 72.4% against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, respectively.

As a thermoplastic polymer with an impressive combination of mechanical properties and biological compatibility, thermoplastic polyurethane (TPU) is one of the important polymers used in various applications such as biomaterials, conducting materials, and tissue engineering. Nanocomposites made of TPUs with nanoclays were prepared by melt-compounding, and the effects of clay on antibacterial activities and physical properties of nanocomposites were investigated. X-ray powder diffraction, water contact angle, and TEM results were analyzed to investigate the effects of dispersion and modification of clays in TPU/clay nanocomposites. Using the pour plating method, scanning electron microscopy technique, and disk diffusion test, TPU/clay nanocomposites were observed to show contact killing activity against bacteria. The antibacterial activities of TPU/clay nanocomposites were found to be affected by the dispersion state and amount of organic modifier of clays. TPU nanocomposites containing 5 wt % organically modified clay showed 98.5% killing efficiency against Gram-negative Escherichia coli and 99.9% against Gram-positive Staphylococcus aureus, while neat TPU showed almost none. The positively charged quaternary ammonium salt groups of clay in TPU/clay nanocomposites interacted with the negatively charged cytoplasmic membrane of bacteria, and the dead bacteria were eliminated by weakened adhesion on hydrophobic backbone surfaces.