No abstract

The toxicity of heavy metals for the environment can be solved by using the adsorption properties of magnetic nanomaterials. These types of nanomaterials can remove pollutants, especially from wastewaters. This study was conducted to determine whether two magnetic nanomaterials can be used as adsorbents for heavy metals (Cr, Cd, Cu, Zn, and Ni) from aqueous solutions under acidic conditions. Qualitative and quantitative elemental information and structural and surface characteristics before and after use as adsorbents were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The obtained data showed a good correlation with the Langmuir adsorption model using the two magnetic nanomaterials in aqueous solutions. The crystalline structure of the FeO powder was identified with XRD. The TEM images of FeO nanoparticles indicated a good dispersion of particles of 85.5 nm. The SEM analysis for FeO-PAA (magnetite covered with sodium alginate) showed spherical particles of magnetite wrapped into the polymer with dimension of ∼200 nm. According to the adsorption Langmuir model, the removal efficiency for uncoated FeO decreased in order: Cr(VI) > Cu(II) > Zn(II) > Ni(II) > Cd(II). For the FeO-PAA nanocomposite (45% w/w Fe in a mass of polymer), the adsorption phenomena appears as follows: Cr(VI) > Cd(II) > Cu(II) ∼ Zn(II) > Ni(II). Langmuir parameters indicated a favorable monolayer adsorption at pH 2.5. The nanocomposite FeO-PAA can be used as an adsorbent with the same performance as uncoated FeO but with the advantage of stability under conditions where industrial wastewaters have an acidic pH.

The need to recycle and develop nanomaterials from waste, and use them in environmental applications has become increasingly imperative in recent decades. A new method to convert the mill scale, a waste of the steel industry that contains large quantity of iron and low impurities into a nanoadsorbent that has the necessary properties to be used for water purification is presented. The mill scale waste was used as raw material for iron oxide nanopowder. A thorough characterization was performed in each stage of the conversion process from the mill scale powder to magnetic nanopowder including XRD (X-ray diffraction), SEM (scanning electron microscopy), TEM (transmission electron microscopy), BET (Brunauer, Emmett and Teller) and magnetization properties. Iron oxide nanoparticles were approximately 5–6 nm with high specific surface area and good magnetic properties. These are the necessary properties that a magnetic nanopowder must have in order to be used as nanoadsorbents in the heavy metal removal from waters. The iron oxide nanoparticles were evaluated as adsorbents for the removal of Cu, Cd and Ni ions.

This paper aims to analyze theoretically events in the economy -ecology -environment (natural resources) mega -system. This analysis includes methodologies making use of the first and second thermodynamic principles (for approaching the waste role in technological processes contour toward environment and the entropy variation importance in the main environmental segments), the application of systems theory and theories relating to emergy. The obtained results allow us to propose, based on the mentioned laws, new techniques and technologies for optimization and increasing efficiency of the economic -ecologicenvironment systems.

The aim of the present paper is to investigate an innovative high corrosion resistance coating realized by electrospark deposition. The coating material was fabricated from HfNbTaTiZr high-entropy alloy. HEA was produced by the mechanical alloying of Hf, Nb, Ta, Ti, and Zr high-purity powders in a planetary ball mill, achieving a good homogenization and a high alloying degree, followed by spark plasma sintering consolidation. The electrodes for electrospark deposition were cut and machined from the bulk material. Stainless steel specimens were coated and electrochemically tested for corrosion resistance in a 3.5% NaCl saline solution.