No abstract

Active rear steering has been used in many research work to enhance ground vehicles’ lateral stability. However, there is a shortage in the published research studies that consider the incorporation of active rear steering for autonomous vehicles applications, especially in case of multi-axle combat vehicles. In this paper, various H∞ controllers are developed to actively steer rear axles of a multi-axle combat vehicle using a linearized bicycle model. The proposed controllers are incorporated with a 22 degrees of Freedom nonlinear Trucksim full vehicle model to study and compare the developed controllers’ performance on a hard surface. Moreover, a frequency-domain analysis is conducted to investigate the influence of the active rear steering on the path-following controllers’ robustness in terms of stability and performance. Three path-following controllers are designed, where the first controller is applied on the front two axles of the vehicle, while the rear two axles are fixed. The second is applied to all-wheel steering vehicle. The third controller is an integration between the designed front steering path-following controller and a developed lateral stability active rear steering controller. Eventually, a series of virtual maneuvers are performed to evaluate the effectiveness of the intended controllers to present the advantages and limitations of each controller at different driving conditions.

Multi-axle vehicles are widely used in several applications such as transportation, industrial, and military field, because of its higher reliability in comparison with conventional two axles vehicles. Despite that, there is a paucity of research studies that consider lateral stability enhancement of these vehicles, especially on rough terrain. This simulation-based research study fills this gap and introduces a new adaptive Active Rear Steering (ARS) controller that improves the lateral stability of an 8x8 combat vehicle for rough-terrain operation. The developed controller is designed utilizing the Integral Sliding Mode Control theory (ISMC) based on Gain-Scheduled Linear Quadratic Regulator (GSLQR). Besides, the GSLQR control gains are optimized by a Genetic Algorithm (GA) toolbox using a new synthesized cost function to ensure asymptotic stability. Furthermore, a new Adaptive-ISMC (AISMC) is introduced by using genetic programming to generate control equations that can replace the developed high-dimension GSLQR gains and facilitate future hardware implementation. The developed controller is evaluated by performing a series of simulation-based Double Lane Change (DLC) maneuvers on several rough terrains. The evaluation is conducted for both high friction and slippery surfaces at high and moderate speed, consequently. The results show high fidelity and robustness of the developed controller in comparison with a previously designed optimal LQR controller.

No abstract

No abstract