No abstract

Attenuated total reflectance-Fourier transform infrared spectrometry and chemometrics model was used for determination of physicochemical properties (pH, redox potential, free acidity, electrical conductivity, moisture, total soluble solids (TSS), ash, and HMF) in honey samples. The reference values of 189 honey samples of different botanical origin were determined using Association Official Analytical Chemists, (AOAC), 1990; Codex Alimentarius, 2001, International Honey Commission, 2002, methods. Multivariate calibration models were built using partial least squares (PLS) for the measurands studied. The developed models were validated using cross-validation and external validation; several statistical parameters were obtained to determine the robustness of the calibration models: (PCs) optimum number of components principal, (SECV) standard error of cross-validation, (R 2 cal) coefficient of determination of cross-validation, (SEP) standard error of validation, and (R 2 val) coefficient of determination for external validation and coefficient of variation (CV). The prediction accuracy for pH, redox potential, electrical conductivity, moisture, TSS, and ash was good, while for free acidity and HMF it was poor. The results demonstrate that attenuated total reflectance-Fourier transform infrared spectrometry is a valuable, rapid, and nondestructive tool for the quantification of physicochemical properties of honey.

This work reports on the synthesis of a series of new sulfonated fluorine-containing aromatic polyamides with increasing degree of sulfonation (DS). The chemical structure of the resulting polymers was confirmed by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance (1 H NMR) which evidenced the presence of amide and sulfonic groups in the proposed concentrations. Afterwards, we carried out a comparative study of heavy metal ion adsorption in membranes based on these aromatic polyamides. The main purpose was to determine the adsorption capacity of the prepared polymer membranes toward Pb 2þ and Hg 2þ in aqueous media at 30 C and pH neutral. The adsorption kinetics was evaluated with the pseudo-first-order and pseudo-second-order models. The adsorption kinetics in all the polyamide membranes followed the pseudo-second-order rate law for both heavy metal ions. It is observed that the adsorption capacities of all the polyamides toward Pb 2þ ions are higher than those of the Hg 2þ ions, and these capacities increase as the DS increases. The equilibrium adsorption amounts, q e , were 11.87 mg/g for Pb 2þ and 5.17 mg/g for Hg 2þ ions for the highest sulfonated polymer.

No abstract

No abstract