No abstract

ABSTRACT:The ability of light expanded clay aggregate to remove lead and cadmium from paint industry's effluents was studied at different levels of adsorbent, contact time and pH in April 2008. For this purpose, lead and cadmium removal from paint industry effluents were studied in batch reactors. lead and cadmium measurements have been taken with non-flame atomic absorption techniques and test methods were adapted from 19 th. Ed. of standard methods for the examination of water and wastewater. In this study, different amounts of Leca (1, 2, 3, 4, 5, 6, 7, 8, 9 and 10 g/L) were investigated. The amount of adsorbed lead and cadmium exposure to Leca increased from 1.41 to 3 mg/g and 0.22 to 0.75 mg/g, respectively. The maximum removal efficiency for Pb was 93.75 % at pH = 7 and exposure to 10 g/L of Leca, while for cadmium, it was nearly 89.7 % at the same condition. In this study, adsorption process of lead and cadmium was fitted with Freundlich adsorption isotherm (R 2 Pb = 0.97 and R 2 Cd = 0.98). The sufficient contact time was deemed 1-2 h for lead and cadmium. According to the results, Leca is recommended as a low cost and available adsorbent to remove lead and cadmium from industrial wastewater.

No abstract

Ciprofloxacin (CIP) is considered as a biological resistant pollutant. The CoFe2O4/activated carbon@chitosan (CoFe2O4/AC@Ch) prepared as a new magnetic nanobiocomposite and used for adsorption of CIP. CoFe2O4/AC@Ch was characterized by Fourier transform-infrared (FT-IR), field emission scanning electron microscope (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), vibrating-sample magnetometer (VSM), and Brunauer–Emmett–Teller (BET) surface area measurements. The pHZPC value of the nanobiocomposite was estimated to be 6.4 by solid addition method. The prepared magnetic nanobiocomposites can be separated easily from water by an external magnet and reused. The effect of CIP concentration (10–30 mg/L), adsorbent dosage (12–100 mg/L), contact time (5–30 min) and pH (3–11) as independent variables on ciprofloxacin removal efficiency was evaluated. Optimum conditions were obtained in CIP concentration: 10 mg/L, adsorbent dosage: 100 mg/L, contact time: 15 min and pH: 5. In this condition, maximum CIP removal was obtained as 93.5%. The kinetic and isotherm equations showed that the process of adsorption followed the pseudo-second order kinetic and Langmuir isotherm. The results indicate that the prepared magnetic nanobiocomposite can be used as good adsorbent for the removal of CIP from aqueous solution and can be also recycled.

ABSTRACT:The release of heavy metals into the environment is a worldwide major concern. Different studies have demonstrated that natural agents have a high removal capacity for divalent heavy metal ions. Wood ash is a natural adsorbent and, in comparison with others, has a very low price. In this study, the removal of heavy metals (Pb and Co) from Binalood paint industry (Kerman, Iran) effluent was investigated in batch condition. Pb and Co measurement in samples were done with atomic absorption equipment and test methods were adapted from standard methods for the examination of water and wastewater. The effect of pH and the amount of adsorbent was determined and different adsorption isotherms were also obtained. This study shows that the adsorption process follows the adsorption Langmuir isotherm. The amount of wood ash has a great role in the adsorption rate and adsorption rate increased as wood ash increased. In the study, the reactions reached equilibrium in 3 h contact time. The maximum Pb removal efficiency was 96.1% at pH 2 with a contact time of 3 h and 100 g/L wood ash and the maximum Co removal efficiency was 99 % at pH 2 with a contact time of 3 h and 100 g/L wood ash. According to the results, wood ash is recommended as a low cost and available adsorbent to remove Pb and Co from municipal and industrial wastewaters.