There is a growing interest to develop environmentally friendly surfactants for utilization with supercritical carbon dioxide (scCO2), which is a "green" solvent with many industrial applications. The goal of the present work was to separate the commonly used soybean lecithin into a phospholipid-rich fraction, acetylate this fraction, and then test its solubility in scCO2 to gauge its suitability as a surfactant for potential scCO2-based applications. Soybean lecithin was first purified by fractionation using acetone and ethanol and then acetylated with acetic anhydride. The acetylated lecithin was further purified by fractionation with acetone to separate the acetylated fraction from the nonacetylated fraction. High-performance liquid chromatography and electrospray ionization mass spectrometry were utilized to characterize these fractions. The various acetylated phospholipid fractions were then tested for solubility in scCO2 under various pressures and temperatures using both a cloud-point and a Fourier transform infrared apparatus. Acetylation was found to increase the solubility of the phospholipids in scCO2, and N-acetylated phosphatidylethanolamine (NAc-PE) was found to be the most soluble component of the acetylated phospholipids.

Spent nickel catalyst (SNC) has the potential of insulting the quality of the environment in a number of ways. Its disposal has a pollution effect. Optimum recovery of fat from SNC, could save the environment and reduce the oil loss. Hexane has been the solvent of choice for oil extraction. Alternative solvents considered to have been safer have been evaluated. Hexane, isopropanol, ethanol and heptane were examined using soxhlet extraction. While hexane is more efficient in oil recovery from SNC, isopropanol proved to be very good in clear separation of oil from waste material and also provides high solvent recovery compared to other solvents. Isopropanol extraction with chill separation of miscella into lower oil-rich phase, and an upper, solvent-rich recyclable phase save mush energy of vaporization for distilling. An aqueous extraction process with immiscible solvent assisted was tested. Solvent like hexane added to SNC, and water added later with continuous stirring. The mixture was stirred for about 30 minutes, prior to centrifugation. Aqueous process extracted less amount of oil compared to solvent extraction.