No abstract

No abstract

No abstract

This research compared three methods for producing and processing nanocomposite polypropylene filament yarns with permanent antimicrobial efficiency. The three methods used to mix antimicrobial agents based on silver nano particles with PP were as follows: 1) mixing of PP powder and inorganic nanocomposite filler with the appropriate concentration using a twin-screw extruder and preparing granules, 2) method 1 with a singlerather than twin-screw extruder, and 3) producing the masterbatch by a twin-screw extruder and blending it with PP in the melt spinning process. All pure polypropylene samples and other combined samples had an acceptable spinnability at the spinning temperature of 240 o C and take-up speed of 2,000 m/min. After producing as-spun filament yarns by a pilot plant, melt spinning machine, the samples were drawn, textured and finally weft knitted. The physical and structural properties (e.g., linear density, tenacity, breaking elongation, initial modulus, rupture work, shrinkage and crystallinity) of the as-spun and drawn yarns with constant and variable draw ratios (the variable draw ratio was used to gain a constant breaking elongation of 50%) were investigated and compared, while DSC, SEM and FTIR techniques were used to characterize the samples. Finally, the antibacterial efficiency of the knitted samples was evaluated. The experimental results revealed that the crystallinity reduction of the as-spun yarn obtained from method 1 (5%) was more than that of method 2 (3%), while the crystallinity of the modified as-spun yarns obtained with method 3 remained unchanged compared to pure yarn. However, the drawing procedure compensated for this difference. By applying methods 2 and 3, the drawing generally improved the tenacity and modulus of the modified fibers, whereas method 1 degraded the constant draw ratio. Although the biostatic efficiency of the nanocomposite yarns was excellent with all three methods, the modified fabrics obtained from methods 1 and 2 showed a higher bioactivity.

Multi-walled carbon nanotubes (MWCNTs)/polyvinylpyrrolidone (PVP) composite nanofibers having varying amounts of MWCNTs were fabricated with an aim to investigate the potential of such nanofibers as an effective light weight electromagnetic interference (EMI) shielding material in the frequency range of 8.2-12.4 GHz (X-band). The state of dispersion of MWCNTs in PVP matrix was studied by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The TEM and SEM analyses confirmed the presence of individual dispersion MWCNTs encapsulated within the electrospun nanofibers and showed MWCNTs/PVP composite nanofiber morphologies with diameters of 150-600 nm. Moreover, the MWCNTs/PVP composite nanofibers were characterized by X-ray diffraction and Raman spectrophotometer. The thermal stability of composite nanofibers studied from thermogravimetric analysis was increased after addition of MWCNTs to PVP matrix. The EMI shielding efficiency of MWCNTs/PVP composite nanofibers increased up to 42 dB. The MWCNTs/PVP composite nanofibers developed in this study have benefits in being light weight and having effective EMI shielding performance and can be best candidates for a broad range of electronic applications.