No abstract

No abstract

Barium hexaferrite (BHF) (BaFe12O19) and its substituted derivatives have been considered as the most potential magnetic candidates with considerable chemical stability and physiochemical characteristics. BHF with x ferrite ions substituted by titanium (Ti-doped BTHF) (BaTixFe12-xO19) (x=1 and x=3) was prepared from ferric oxide (Fe2O3), barium oxide (BaO), and titanium oxide (TiO2) of purity >98%. The materials were mixed with deionized water and then dried at 1100°C and 1200°C overnight. For the formation of BaFe12O19 phase, the mixture was annealed at a rate of 10°C/min in static air atmosphere until reaching 1200°C and then maintained for 10 h. Structural properties of these samples were measured using X-ray diffraction (XRD) and scanning electron microscopy, while magnetic properties were measured using vibrating sample magnetometer (VSM) device. Magnetic and structural characteristics are investigated after preserving Ti-doped BHF samples at room temperature and ambient conditions for 12 years. The samples are characterized using the same previous techniques to find out the possible effect of long period storage on their properties. The results showed that the storage process has little effect on these properties where the granular size increased due to increased oxidation. XRD tests also showed the absence of Ti at low ratios due to increased oxidation of ferrite. VSM results showed increased magnetic properties after storage due to increased iron oxide.

No abstract