This study has two main aims; firstly, investigating the behavior of slabs that are strengthened with different types of reinforcements and with Slurry-Infiltrated Mat Concrete (SIMCON) laminates, having different dimensions and thicknesses and subjected to static and dynamic (impact) loads. Secondly, the development of a non-linear finite element (FE) model to simulate the behavior of the tested slabs utilizing the ABAQUS/Standard package. The modeling of the NSC slabs strengthened with either SIMCON or steel plates involves using three-dimensional solid elements that are partially integrated with the modeling of concretes using the 8-node brick element (C3D8R). The results of the experimental and numerical investigations are compared to examine whether the slab modeling is sufficient. The comparison includes the element type, material characteristics, real constants, and convergence study. The predicted ultimate load-carrying capacity versus vertical deformation response is compared with the lab results that correspond with it, as obtained via the FE analysis of all tested slabs. In addition, the results of the FE analysis of slab specimens that are strengthened with steel plates were compared to the results of the ones strengthened using SIMCON laminates. The obtained results have led to a number of significant observations. Considering the punching shear strength, it was found that using SIMCON strengthening in different dimensions increased the slab’s punching shear capacity and outperformed steel-strengthened slabs. As for the plate stiffness, SIMCON-strengthened slabs presented higher stiffness rates than steel-strengthened slabs, to the extent that even 20 mm SIMCON strengthening outperformed the steel plate-strengthened slabs of any thickness or dimensions. The axial load-displacement relationships indicate that all the numerical models show a stiffer behavior when compared with the experimental axial load-displacement relationships. The slab thickness of SIMCON significantly affects the load-carrying capacity, and it increases with the increase in thickness. Likewise, using strengthening from steel plates gives a higher load-carrying capacity. Finally, since the results of the yield line analyses for these slabs are found to match the experimental results closely, this method is considered to be suitable for practical use in determining the strength of plated slabs. Therefore, the conclusion is drawn that the proposed FE model can be sufficiently used in evaluating the dynamic responses of slabs strengthened with SIMCON or steel plates and subjected to cyclic and impact load.

Concrete is the central pile for the infrastructure that maintains civilisation and human life. The concrete industry faces many challenges, including improving mechanical properties, eco-friendliness, and durability. In this context, the present study focuses on evaluating and modelling themechanical properties of engineered concrete, namely slurry-infiltrated fibrous concrete (SIFCON). The main experiments will be devoted to measuring and modelling the failures of slabs made from SIFCON under two loading systems, namely static and impact loading systems. The model was developed using a non-linear finite element analysis. The experiments considered the influence of the geometry of the reinforcement steel fibres (hook-end fibres, microfibres, and combined hook-end and microfibres), sizes of fibres, and slab dimensions. The outcomes of this investigation showed that increasing the slab’s thickness enhances the load-bearing capacity of the SIFCON slab, and the microfibres and combined hook-end and microfibres improved the load-bearing capacity of the slab compared to the hook-end fibre. Generally, it was noticed that the outcomes of the experiments agreed with the modelling outcomes. Nevertheless, it was noticed that experimentally measured axial deformation was more significant than the predicted axial deformation. In summary, the difference between experimental and modelling outcomes was 1.1–10.2%, with a standard deviation of 0.0264. Based on the excellent ability of SIFCON to resist impacts and dynamic loads, it is recommended to be used in pavements, military structures, nuclear reactor walls, and in areas subjected to high bending moments, such as corner connections subjected to opening bending moments.