No abstract

The structural use of concrete depends largely on its strength, especially compressive strength.Various tests were carried out to ascertain the properties of concrete materials, whereas test performances ofthe concrete with different mix ratios at specific ages of curing were undertaken. The study determined thecompressive strength of concrete using different curing methods. Four different methods of curing (ponding,continuous wetting, open-air curing and sprinkling with water) were used. Seventy-two (72) cubes were castusing a mix ratio of 1:2:4 and 1:3:6 with 0.5 water cement ratio and with 0.6 waters cement ratio respectively.The compressive strengths were determined after 7 days, 14 days and at 28 days of curing. Findings showthat for 1:2:4 concrete, maximum of 28-day compressive was the highest for concrete cured by ponding andthe least was by sprinkling water. Further findings show that for 1:3:6 concrete, maximum of 28-daycompressive strength was obtained using ponding and the least was open air curing. Despite ponding methodproducing the highest compressive strength of concrete, it is practically impossible to cure cubes aboveground structural elements. Wet-covering method is recommended for structural elements, such as columns,beams and slabs in other to produce concreteof a required compressive strength.