Milled wood lignin (MWL) and acetic and formic acid lignin (AL and FL) from Miscanthus x giganteus bark were produced, respectively, before and after organosolv fractionations under optimal conditions, in terms of organic and hydrochloric acid concentrations, liquid/wood ratio, and reaction time. In order to study the M. x giganteus native lignin structure and its modifications during the fractionation process, the lignins were studied by two-dimensional heteronuclear single quantum coherence (2D-(HSQC)), (13)C- and (31)P nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FTIR), size-exclusion chromatography (SEC) both before and after thioacidolysis, and elemental analysis. In addition, chemical composition analysis was performed on ash, Klason lignin, and carbohydrate content. The analyses demonstrated that M. x giganteus native lignin (MWL) is highly acylated at the C(gamma) of the lignin side chain (46%), possibly with p-coumarate and/or acetate groups. This is newsworthy since several earlier studies showed that acylation at the gamma-carbon commonly occurs in C(3) and CAM grasses, whereas M. x giganteus is a C(4) grass. Furthermore, M. x giganteus showed a low S/G ratio (0.7) and a predominance of beta-O-4' linkages (up to 93% of all linkages). AL and FL lose part of these linkages during organosolv fractionation (up to 21 and 32%, respectively). The p-coumarate groups resist fractionation processes and are still present in high quantities in AL and FL. During the fractionation process, lignin is acetylated (acetic acid process) and condensed, with the G units condensing more than S units. M. x giganteus MWL contains a high content of carbohydrates (22.8%), suggesting that it is a lignin-carbohydrate complex (LCC). AL and FL showed low carbohydrate contents because of the breaking down of the LCC structures. AL and FL have high molecular weights and low polydispersities, and are high in phenolic content, qualities that make these suitable for different applications. These results suggest that refinement of M. x giganteus via organosolv processes could potentially turn this grass into a valuable source of both fiber and lignin.

This study has shown that ultrafiltration allows the selective extraction from industrial black liquors of lignin fraction with specific thermo-mechanical properties, which can be matched to the intended end uses. Ultrafiltration resulted in the efficient fractionation of kraft lignin according to its molecular weight, with an accumulation of sulfur-containing compounds in the lowmolecular weight fractions. The obtained lignin samples had a varying quantities of functional groups, which correlated with their molecular weight with decreased molecular size, the lignin fractions had a higher amount of phenolic hydroxyl groups and fewer aliphatic hydroxyl groups. Depending on the molecular weight, glass-transition temperatures (T g ) between 70 and 170 C were obtained for lignin samples isolated from the same batch of black liquor, a tendency confirmed by two independent methods, DSC, and dynamic rheology (DMA). The Fox-Flory equation adequately described the relationship between the number average molecular masses (M n ) and T g 's-irrespective of the method applied. DMA showed that low-molecular-weight lignin exhibits a good flow behavior as well as high-temperature crosslinking capability. Unfractionated and high molecular weight lignin (M w >5 kDa), on the other hand, do not soften sufficiently and may require additional modifications for use in thermal processings where melt-flow is required as the first step.

Hydrothermal ageing of polylactide/sisal biocomposites. Studies of water absorption behavior and physicochemical performance.

Carbon fibers (CFs) are gaining increasing importance in lightweight composites, but their high price and reliance on fossil-based raw materials stress the need for renewable and cost-efficient alternatives. Kraft lignin and cellulose are renewable macromolecules available in high quantities, making them interesting candidates for CF production. Dry-jet wet spun precursor fibers (PFs) from a 70/30 w/w blend of softwood kraft lignin (SKL) and fully bleached softwood kraft pulp (KP) were converted into CFs under fixation. The focus was to investigate the effect of carbonization temperature and time on the CF structure and properties. Reducing the carbonization time from 708 to 24 min had no significant impact on the tensile properties. Increasing the carbonization temperature from 600 to 800 °C resulted in a large increase in the carbon content and tensile properties, suggesting that this is a critical region during carbonization of SKL:KP PFs. The highest Young’s modulus (77 GPa) was obtained after carbonization at 1600 °C, explained by the gradual transition from amorphous to nanocrystalline graphite observed by Raman spectroscopy. On the other hand, the highest tensile strength (1050 MPa) was achieved at 1000 °C, a decrease being observed thereafter, which may be explained by an increase in radial heterogeneity.

No abstract