No abstract

Having been activated with glutaraldehyde, modified poly(ethylene terephthalate) grafted acrylamide fiber was used for the immobilization of horseradish peroxidase (HRP). Both the free HRP and the immobilized HRP were characterized by determining the activity profile as a function of pH, temperature, thermal stability, effect of organic solvent and storage stability. The optimum pH values of the enzyme activity were found as 8 and 7 for the free HRP and the immobilized HRP respectively. The temperature profile of the free HRP and the immobilized HRP revealed a similar behaviour, although the immobilized HRP exhibited higher relative activity in the range from 50 to 60 degrees C. The immobilized HRP showed higher storage stability than the free HRP.

No abstract

ABSTRACT:The adsorption behavior of methacrylic acid-grafted poly(ethylene terephthalate) fibers was studied toward the copper(II) ion in aqueous solutions by a batch equilibriation technique. The influence of treatment time, temperature, pH of the solution, metal ion concentration, and graft yield were considered. One hour of adsorption time was found sufficient to reach adsorption equilibrium for the copper(II) ion. It was found that the adsorption isotherm of Cu(II) fits Langmuir-type isotherms. The adsorption process is not affected by the temperature when treated with low ion concentration, but is remarkably decreased at a high ion concentration. The heat of adsorption value was calculated as 0.71 kcal/mol. It was found that the reactive fibers are stable and regenerable by acid without losing their activity.

Sorption of hexavalent chromium ions from aqueous solution by poly 4-vinyl pyridine [Poly(4-VP)] was studied. The batch method was applied for adsorption processes. The effects of initial ion concentration, time, pH and temperature on adsorption were investigated. A treatment time of 60 min was found to be sufficient to reach equilibrium. pH 3.0 was found as the optimum pH value for the process. The maximum adsorption performance was achieved at 86.7 mg g Ϫ1 using 500 mg L Ϫ1 Cr (VI) solutions. The process of adsorption of Cr (VI) was explained by Langmuir isotherm.