No abstract

This paper explores control strategies for active power distribution nodes (APDNs) using a hierarchical approach. The proposed APDN consists of multiple bidirectional interface modules and an embedded energy storage that is commonly connected to these modules. Such configuration properties make the APDN attractive as a major interface unit for active power flow control in microgrids and power distribution networks. A two-level hierarchy is considered so that the primary level performs load sharing using droop control, and the secondary level performs embedded energy storage management. The stability of the proposed control framework is studied and the proposed design is verified by an experimental setup.Index Terms-Batteries, dc-dc power conversion, energy management, hierarchical control, power control.

In order to implement reliable and flexible power management among energy sources, a decentralized power management approach for electrical power systems (EPSs) in the more electric aircraft (MEA) is studied. Considering the increased use of electrical power for various functions, the performance of MEA would be determined by the design and operation of the EPS. By using a virtual impedance that includes both a resistive term and an inductive term, autonomous power sharing is realized. Because of the frequency dependence in the virtual impedance, different power sharing ratios between steady state and transient state can be considered. Not only the operation of various power sources is coordinated without supervision of a centralized controller, but also the operation profile of each source can be adjusted to meet output characteristics of each source. To demonstrate the effectiveness of the proposed approach, a series of simulations that consider various virtual impedance configurations were conducted. The proposed approach contributes to a higher level of operational flexibility, while enabling reliable and cost-effective management of MEAs.

It is necessary for polymeric materials to have superior tracking resistance against various stress conditions for outdoor applications. In this study, the effect of nano-sized alumina tri-hydrate (ATH) particles on the tracking resistance of silicone rubber (SiR) is studied. Specimens with filler loadings of 1, 3, 5, 10, and 20 wt % are used for performance characterization. From the inclined plane test (IPT) results, apparent improvement in tracking resistance was achieved by mixing 3 wt % of nano-sized fillers, compared to unfilled specimens. ATH/SiR nanocomposites with 5 wt % loading showed comparable tracking performance to SiO2/SiR microcomposites with 20 wt % loading. For detailed analysis, measurements of surface contact angle (SCA) and surface leakage current, and thermo-gravimetric analysis (TGA) were performed. As the nano-ATH filler concentration increased, both thermal stability and leakage current characteristics were improved. Such results agreed with the tracking resistance performance by showing that thermal decomposition and surface charge transport is inhibited in ATH/SiR nanocomposites. Furthermore, performance improvement in nanocomposites was achieved, even at low filler loadings, compared to microcomposites. Meanwhile, the change in SCA was found to be rather limited, regardless of filler loading and filler size.

No abstract