The utilization of the TM020-mode cavity for the storage ring based light source was pioneered by SPring-8 with its high quality factor and hence its high shunt impedance. KEK-LS has also studied the possibility of using this type of cavity for their storage ring. The TM020-mode cavity has larger transverse dimension compared to the traditional TM010-mode cavity, but with its higher shunt impedance it can be designed to fit in the new low emittance storage ring regardless. The new storage ring based light source project in Thailand aims to optimum the low emittance beam in nano-meters region with the energy of 3 GeV. The TM020-mode cavity was considered as the main cavity and the harmonic cavity for the storage ring. They have been designed to have their pipe aperture fits the storage ring beam ducts. The main cavity has a high shunt impedance of 8.3 MΩ with the 51,000 unloaded quality factor. The harmonic cavity has a high shunt impedance and an unloaded quality factor of 2.45 MΩ and 36,000, respectively. The damping mechanism of the parasitic modes and the tuning mechanism of the operating mode of these cavities were also studied. There will be four main cavities and six harmonic cavities in the new storage ring. Detailed design and study of these cavities will be presented.

No abstract