No abstract

A Phenomenological Kinetic Model has been developed that includes all the relevant steps involved in CNT growth by CCVD,that is, carbon source decomposition, nanoparticle surface carburization, carbon diffusion, nucleation, CNT growth, and growth termination by catalyst deactivation or by the effect of steric hindrance.Here we emphasize the importance of using a proper kinetic description of all the stages, in particular the initial carburization-nucleation and the growth cessation. We have discussed the different mechanisms proposed to explain the critical step of carburization-nucleation and have used an autocatalytic kinetic model to describe it. The two parameters involved in this autocatalytic equation allow a very good fit of the initial induction period usually observed during the growth of CNTs. In addition, rigorous formulations of the main causes of CNT growth cessation (catalyst deactivation by several causes and steric hindrance) have been proposed. The developed model is a versatile tool of potentially general application. In this paper, we have applied it to fit data obtained in our lab, and also to super growth of VA-SWNT experimental data published in the literature. In all cases the values obtained for the kinetic parameters have realistic physical meaning in good agreement with the mechanism of CNT formation.

No abstract

This work addresses the preparation and application of the synthesis of graphene in Ni-Cu catalysts supported on carbonaceous materials. The catalysts have been prepared by a biomorphic mineralization technique which involves the thermal decomposition, under reductive atmosphere, of commercial cellulose previously impregnated with the metallic precursors. The characterization results indicate that the preparation method leads to the formation of carbonaceous supports with a moderate microporosity (ca. 33% pore volume) and adequate surface area (343 m 2 /g), maintaining the original external texture. The catalytic performance of these materials was previously tested in liquid phase reactions [11]. In order to extend the use of these catalysts, in this work we present a study corresponding to a gas phase reaction: the synthesis of graphenic nanomaterials by catalytic decomposition of methane (CDM). The influence of the reaction temperature and of the feed composition (i.e. %CH 4 and %H 2) has been studied. The graphenic nanomaterials obtained after reaction were characterized by nitrogen adsorption-desorption isotherms, Raman spectroscopy and transmission electron microscopy (TEM). The results indicate that the carbonaceous nanomaterial with the highest quality is obtained operating at 950 °C and feeding 28.6% of CH 4 and 14.3% of H 2. The evolution of the carbon mass during the reaction time was analysed using a phenomenological kinetic model that takes into account the main stages involved during the formation of carbonaceous nanomaterials (NCMs). The results obtained from the kinetic model along with the characterization results enable the influence of the operating variables on each stage of the carbonaceous nanomaterial formation to be discerned.