The Pacific Centre for Isotopic and Geochemical Research (PCIGR) at the University of British Columbia has undertaken a systematic analysis of the isotopic (Sr, Nd, and Pb) compositions and concentrations of a broad compositional range of U.S. Geological Survey (USGS) reference materials, including basalt (BCR‐1, 2; BHVO‐1, 2), andesite (AGV‐1, 2), rhyolite (RGM‐1, 2), syenite (STM‐1, 2), granodiorite (GSP‐2), and granite (G‐2, 3). USGS rock reference materials are geochemically well characterized, but there is neither a systematic methodology nor a database for radiogenic isotopic compositions, even for the widely used BCR‐1. This investigation represents the first comprehensive, systematic analysis of the isotopic composition and concentration of USGS reference materials and provides an important database for the isotopic community. In addition, the range of equipment at the PCIGR, including a Nu Instruments Plasma MC‐ICP‐MS, a Thermo Finnigan Triton TIMS, and a Thermo Finnigan Element2 HR‐ICP‐MS, permits an assessment and comparison of the precision and accuracy of isotopic analyses determined by both the TIMS and MC‐ICP‐MS methods (e.g., Nd isotopic compositions). For each of the reference materials, 5 to 10 complete replicate analyses provide coherent isotopic results, all with external precision below 30 ppm (2 SD) for Sr and Nd isotopic compositions (27 and 24 ppm for TIMS and MC‐ICP‐MS, respectively). Our results also show that the first‐ and second‐generation USGS reference materials have homogeneous Sr and Nd isotopic compositions. Nd isotopic compositions by MC‐ICP‐MS and TIMS agree to within 15 ppm for all reference materials. Interlaboratory MC‐ICP‐MS comparisons show excellent agreement for Pb isotopic compositions; however, the reproducibility is not as good as for Sr and Nd. A careful, sequential leaching experiment of three first‐ and second‐generation reference materials (BCR, BHVO, AGV) indicates that the heterogeneity in Pb isotopic compositions, and concentrations, could be directly related to contamination by the steel (mortar/pestle) used to process the materials. Contamination also accounts for the high concentrations of certain other trace elements (e.g., Li, Mo, Cd, Sn, Sb, W) in various USGS reference materials.

No abstract

No abstract

. Reproducibility is better than 50 ppm for the granitoid compositions and better than 40 ppm for the basaltic/andesitic compositions. For the isotopic analyses acquired early in this project on glass columns, Hf isotopic analyses from several of the reference materials were significantly less reproducible than Nd and Sr isotopic analyses determined from the same sample dissolution. The 176 Hf/ 177 Hf ratios for relatively radiogenic compositions (BCR-1, 2; BHVO-1, 2; RGM-1) were shifted systematically toward lower values by 100-150 ppm when a borosilicate primary column was used. Although systematic, the shift for felsic compositions was generally within analytical error, except for GSP-2, which has a very low Hf isotopic ratio, where the shift was to higher Hf and high Hf concentrations of the borosilicate glass column (16 ppm) and frit material (22 ppm) indicate that only small amounts of such unradiogenic material could cause significant contamination of small samples. For the basaltic (BCR-1, 2; BHVO-1, 2) and rhyolitic (RGM-1) samples, approximately 3 ng of Hf from the column or frit would be enough to produce the observed 100-150 ppm shift. Accurate, high-precision 176 Hf/ 177 Hf data can only be acquired if samples are processed using all PTFE Teflon 1 labware, or quartz and polypropylene.

No abstract