Stability of negative bias temperature stress (NBTS) of nitrogen doped amorphous InGaZnO (a-IGZO) thin-film transistor (TFT) is investigated. Undoped a-IGZO TFT stressed at 333 K exhibit a larger negative ΔVTH (−3.21 V) with an unpredictable sub-threshold swing (SS) of hump shaped transfer curve due to the creation of meta-stable traps. Defects related hump formation has disappeared with small ΔVTH (−1.13 V) and ΔSS (0.018 V/dec) in nitrogen doped a-IGZO TFT. It is observed that nitrogen doping enhances device stability by well controlled oxygen vacancy and trap sites in channel and channel/dielectric interface.

Toward a Smart Optical Biosensor Based on Nanoporous Anodic Alumina (NAA): By modifying the pore geometry in nanoporous anodic alumina we are able to change the effective medium at will and tune the photoluminescence of NAA. The oscillations in the PL spectrum are converted into exclusive barcodes, which are useful for developing optical biomedical sensors in the UV‐Visible region.

We present n‐type bifacial solar cells with a rear interfacial SiOx/n+:poly‐Si passivating contact (‘monoPoly’ cells) where the interfacial oxide and n+:poly‐Si layers are fabricated using an industrial inline plasma‐enhanced chemical vapor deposition (PECVD) tool. We demonstrate outstanding passivation quality with dark saturation current density (J0) values of approximately 3 fA/cm2 and implied open‐circuit voltage (iVoc) of 730 mV at 1‐sun conditions after firing in an industrial belt furnace. Using a simple solar cell process flow that can be easily adapted for mass production, a peak cell efficiency of 22.8% with a cell open circuit voltage (Voc) of 696 mV is achieved on large‐area, screen‐printed, Czochralski‐silicon (Cz‐Si) solar cells using commercial fire‐through metal pastes.

No abstract