This study interpreted the characteristics of the site and provenance of raw material by performing material characteristics analysis of the slags and tuyeres excavated from the Sinpung site in Wanju, Jeollabuk-do. The major chemical compositions suggested that the slags and tuyeres were created when Cu-Sn-Pb was alloyed. Metal microscope and scanning electron microscopy-energy dispersive spectrometer analyses revealed that the slags and tuyeres were by-products formed in the alloying process. This alloy, created by adding galena to copper and tin ingots, was an intermediary material used in making the finished products. According to the lead isotope ratio analysis result, slags could be made using galena of the southern Zone III region of Korea. Based on the decomposition of mica group minerals and the formation of mullite detected through X-ray diffraction analysis, it is possible to conclude that the tuyeres operated at approximately 1,000℃ as, the mullite was detected on the outside of the tuyeres.

As interest in the public display of art and outdoor sculptures is increasing, the conservation and treatment of these sculptures is becoming increasingly crucial. Long-term exposure to the natural elements and atmospheric pollution can cause corrosion and deterioration in outdoor sculptures. In the case of Kim Chan Shik's "Feeling", which was exhibited in the outdoor sculpture park at the National Museum of Modern and Contemporary Art (MMCA), the patina of the sculpture was damaged during a long outdoor exhibition. Therefore, the treatment process was as follows: recording of condition, sanding, repatination, and wax coating. Consequently, the sculpture was restored similar to the original. Chemical analysis revealed that the sculpture was crafted from bronze and was cast from a quaternary alloy of Cu-Pb-Sn-Zn. The welding