A smooth, ultra-flexible, and transparent electrode was developed from silver nanowires (AgNWs) embedded in a colorless polyimide (cPI) by utilizing an inverted film-processing method. The resulting AgNW-cPI composite electrode had a transparency of >80%, a low sheet resistance of 8 Ω/□, and ultra-smooth surfaces comparable to glass. Leveraging the robust mechanical properties and flexibility of cPI, the thickness of the composite film was reduced to less than 10 μm, which is conducive to extreme flexibility. This film exhibited mechanical durability, for both outward and inward bending tests, up to a bending radius of 30 μm, while maintaining its electrical performance under cyclic bending (bending radius: 500 μm) for 100,000 iterations. Phosphorescent, blue organic light-emitting diodes (OLEDs) were fabricated using these composites as bottom electrodes (anodes). Hole-injection was poor, because AgNWs were largely buried beneath the composite's surface. Thus, we used a simple plasma treatment to remove the thin cPI layer overlaying the nanowires without introducing other conductive materials. As a result, we were able to finely control the flexible OLEDs' electroluminescent properties using the enlarged conductive pathways. The fabricated flexible devices showed only slight performance reductions of <3% even after repeated foldings with a 30 μm bending radius.

No abstract

A series of harmonic Joule-heating experiments have been employed to determine the thermal conductivities of thin films of pentacene, N,N

We report a thin-film encapsulation method for organic electronics that combines the deposition of a layer of SiOx or SiNx (100 nm) by plasma enhanced chemical vapor deposition followed by a layer of Al2O3 (10–50 nm) by atomic layer deposition and a 1-μm-thick layer of parylene by chemical vapor deposition. The effective water vapor transmission rates of the encapsulation was (2±1)×10−5 g/m2 day at 20 °C and 50% relative humidity (RH). The encapsulation was integrated with pentacene/C60 solar cells, which showed no decrease in conversion efficiency after 5800 h of exposure to air demonstrating the effectiveness of the encapsulation methodology.

No abstract